Generic placeholder image

Current Nanomaterials

Editor-in-Chief

ISSN (Print): 2405-4615
ISSN (Online): 2405-4623

Research Article

Structure, Composition and Morphology of Self-Assembled 2D Nanostructures Based on SnO2 Nanoparticles Observed in Unannealed Mn Doped Hydrated Form of Tin Oxide (II) or (IV) Synthesized by Co-precipitation Method

Author(s): Joaquin Reyes-Gonzalez, Diana Garcia-Gutierrez, Marco Garza-Navarro and Domingo Garcia-Gutierrez*

Volume 8, Issue 4, 2023

Published on: 21 December, 2022

Page: [385 - 396] Pages: 12

DOI: 10.2174/2405461508666221128111706

Price: $65

Abstract

Background: 2D nanostructures are greatly interested in different technological applications, particularly optoelectronics. Tin oxide 2D nanostructures have shown great transparency and ideal charge carrier transport properties.

Objective: The current study aims to evaluate the main characteristics of 2D-nanostructures observed during the synthesis of hydrated forms of tin oxide (II) or (IV) doped with Mn.

Methods: A chemical co-precipitation method was used for the synthesis of the hydrated forms of tin oxide (II) or (IV) with different conditions on time (1 and 1.5 h) and temperature (60ºC and 90ºC), using MnCl2 as the manganese source.

Results: X-ray diffraction and XPS results revealed the formation of the hydroromarchite phase (Sn6O4(OH)4) as the main product of the synthesis reaction. Scanning electron microscopy images were used to identify and measure, in a first approach, the 2D nanostructures observed as a result of the synthesis. Morphological characterization using different transmission electron microscopy techniques revealed the presence of nanoparticles that were observed to self-assemble to form the 2D nanostructures observed (nanorods and nanosheets). Nonetheless, selected-area electron diffraction suggested the presence of the cassiterite phase (SnO2) in the nanoparticles forming the 2D nanostructures. Furthermore, chemical analyses using energy-dispersive X-ray spectroscopy supported the observations made by the diffraction studies regarding the presence of cassiterite phase (SnO2) in the 2D nanostructures. The number of 2D nanostructures observed in the analyzed samples increased as the Mn concentration increased in the synthesis reaction.

Conclusion: The addition of Mn as an intended doping element increased the crystallite size and the polycrystallinity of the synthesized hydrated forms of tin oxide (II) or (IV). Additionally, it also promoted the formation of 2D nanostructures made of SnO2 nanoparticles.

Keywords: 2D-nanostructures, tin oxide (II), Mn, cassiterite phase, nanoparticle, X-ray diffraction.

Graphical Abstract
[1]
Wang C, Du G, Ståhl K, Huang H, Zhong Y, Jiang JZ. Ultrathin SnO2 nanosheets: Oriented attachment mechanism, nonstoichiometric defects, and enhanced lithium-ion battery performances. J Phys Chem C 2012; 116(6): 4000-11.
[http://dx.doi.org/10.1021/jp300136p]
[2]
Yang J, Zeng Z, Kang J, et al. Formation of two-dimensional transition metal oxide nanosheets with nanoparticles as intermediates. Nat Mater 2019; 18(9): 970-6.
[http://dx.doi.org/10.1038/s41563-019-0415-3] [PMID: 31285617]
[3]
Manikandan D, Boukhvalov DW, Amirthapandian S, et al. An insight into the origin of room-temperature ferromagnetism in SnO2 and Mn-doped SnO2 quantum dots: An experimental and DFT approach. Phys Chem Chem Phys 2018; 20(9): 6500-14.
[http://dx.doi.org/10.1039/C7CP07182E] [PMID: 29445813]
[4]
Saji KJ, Tian K, Snure M, Tiwari A. 2D tin monoxide-an unexplored p-type van der waals semiconductor: Material characteristics and field effect transistors. Adv Electron Mater 2016; 2(4): 1500453.
[http://dx.doi.org/10.1002/aelm.201500453]
[5]
Daeneke T, Atkin P, Orrell-Trigg R, et al. Wafer-scale synthesis of semiconducting SnO monolayers from interfacial oxide layers of metallic liquid tin. ACS Nano 2017; 11(11): 10974-83.
[http://dx.doi.org/10.1021/acsnano.7b04856] [PMID: 29045121]
[6]
Agrahari V, Tripathi AK, Mathpal MC, et al. Effect of Mn doping on structural, optical and magnetic properties of SnO2 nanoparticles. J Mater Sci Mater Electron 2015; 26(12): 9571-82.
[http://dx.doi.org/10.1007/s10854-015-3620-0]
[7]
Babu B, Kadam AN, Rao GT, Lee SW, Byon C, Shim J. Enhancement of visible-light-driven photoresponse of Mn-doped SnO 2 quantum dots obtained by rapid and energy efficient synthesis. J Lumin 2018; 195: 283-9.
[http://dx.doi.org/10.1016/j.jlumin.2017.11.040]
[8]
Wan W, Li Y, Ren X, Zhao Y, Gao F, Zhao H. 2D SnO2 nanosheets: Synthesis, characterization, structures, and excellent sensing performance to ethylene glycol. Nanomaterials 2018; 8(2): 112.
[http://dx.doi.org/10.3390/nano8020112] [PMID: 29462938]
[9]
Ahmad N, Khan S, Ansari MMN. Optical, dielectric and magnetic properties of Mn doped SnO2 diluted magnetic semiconductors. Ceram Int 2018; 44(13): 15972-80.
[http://dx.doi.org/10.1016/j.ceramint.2018.06.024]
[10]
Wang YF, Li JW, Hou YF, Yu XY, Su CY, Kuang DB. Hierarchical tin oxide octahedra for highly efficient dye-sensitized solar cells. Chemistry 2010; 16(29): 8620-5.
[http://dx.doi.org/10.1002/chem.201001333] [PMID: 20593448]
[11]
Jońca J, Ryzhikov A, Kahn ML, et al. SnO 2 “Russian Doll” octahedra prepared by metalorganic synthesis: A new structure for sub-ppm co detection. Chemistry 2016; 22(29): 10127-35.
[http://dx.doi.org/10.1002/chem.201600650] [PMID: 27312005]
[12]
Kuznetsova SA, Pichugina AA, Kozik VV. Microwave synthesis of a photocatalytically active SnO-based material. Inorg Mater 2014; 50(4): 387-91.
[http://dx.doi.org/10.1134/S0020168514040086]
[13]
Xiao J, Wu QL, Liu P, et al. Highly stable sub-5 nm Sn6O4 (OH)4 nanocrystals with ultrahigh activity as advanced photocatalytic materials for photodegradation of methyl orange. Nanotechnology 2014; 25(13): 135702.
[http://dx.doi.org/10.1088/0957-4484/25/13/135702] [PMID: 24583803]
[14]
Uchiyama H, Nakanishi S, Kozuka H. Biomimetic synthesis of nanostructured SnO particles from Sn6O4 (OH)4 in aqueous solution of gelatin. CrystEngComm 2015; 17(3): 628-32.
[http://dx.doi.org/10.1039/C4CE01829J]
[15]
Ghosh S, Roy S. Effect of ageing on Sn6O4(OH)4 in aqueous medium-simultaneous production of SnO and SnO2 nanoparticles at room temperature. J Sol-Gel Sci Technol 2017; 81(3): 769-73.
[http://dx.doi.org/10.1007/s10971-016-4251-5]
[16]
Indira Gandhi T, Ramesh Babu R, Ramamurthi K, Arivanandhan M. Effect of Mn doping on the electrical and optical properties of SnO2 thin films deposited by chemical spray pyrolysis technique. Thin Solid Films 2016; 598: 195-203.
[http://dx.doi.org/10.1016/j.tsf.2015.12.008]
[17]
Mahana S, Sapkota P, Ghosh S. Structural and electronic phase evolution of Tin dioxide arXiv:160608137 2016.
[18]
Lekshmy SS, Berlin IJ, Maneeshya LV. Structural and optical characterisation of tin dioxide thin films by sol-gel dip coating technique. IOP Conf Ser Mater Sci Eng 2015; 73: 012018.
[19]
Salah N, Habib S, Azam A, Ansari MS, Al-Shawafi WM. Formation of Mn-doped SnO2 nanoparticles via the microwave technique: Structural, optical and electrical properties. Nanomater Nanotechnol 2016; 6: 17.
[http://dx.doi.org/10.5772/62520]
[20]
Wang H, Rogach AL. Hierarchical SnO2 nanostructures: Recent advances in design, synthesis, and applications. Chem Mater 2014; 26(1): 123-33.
[http://dx.doi.org/10.1021/cm4018248]
[21]
Ma R, Sasaki T. Nanosheets of oxides and hydroxides: Ultimate 2D charge-bearing functional crystallites. Adv Mater 2010; 22(45): 5082-104.
[http://dx.doi.org/10.1002/adma.201001722] [PMID: 20925100]
[22]
Atkin P, Orrell-Trigg R, Zavabeti A, et al. Evolution of 2D tin oxides on the surface of molten tin. Chem Commun (Camb) 2018; 54(17): 2102-5.
[http://dx.doi.org/10.1039/C7CC09040D] [PMID: 29372725]
[23]
Wei Y, Liu J, Cheng F, Chen J. Mn-doped atomic SnO 2 layers for highly efficient CO2 electrochemical reduction. J Mater Chem A Mater Energy Sustain 2019; 7(34): 19651-6.
[http://dx.doi.org/10.1039/C9TA06817A]
[24]
Sun Y, Lei F, Gao S, Pan B, Zhou J, Xie Y. Atomically thin tin dioxide sheets for efficient catalytic oxidation of carbon monoxide. Angew Chem Int Ed 2013; 52(40): 10569-72.
[http://dx.doi.org/10.1002/anie.201305530] [PMID: 23946214]
[25]
Jaśkaniec S, Kavanagh S R, Coelho J, et al. Solvent engineered synthesis of layered SnO nanoparticles for high-performance anodes. Mater Appl 2021; 5: 27.
[26]
Abrahams I, Grimes SM, Johnston SR, Knowles JC. Tin(II) oxyhydroxide by X-ray powder diffraction. Acta Crystallogr C 1996; 52(2): 286-8.
[http://dx.doi.org/10.1107/S0108270195012625]
[27]
Qamar MA, Shahid S, Khan SA, Zaman S, Sarwar MN. Synthesis characterization, optical and antibacterial studies of Co-Doped SnO2 nanoparticles. Dig J Nanomater Biostruct 2017; 12: 1127-35.
[28]
Khan SA, Shahid S, Jabin S, Zaman S, Sarwar MN. Synthesis and characterization of un-doped and copper doped zinc oxide nanoparticles for their optical and antibacterial studies. Dig J Nanomater Biostruct 2018; 13: 285-97.
[29]
Rajesh N, Kannan JC, Krishnakumar T, Leonardi SG, Neri G. Sensing behavior to ethanol of tin oxide nanoparticles prepared by microwave synthesis with different irradiation time. Sens Actuators B Chem 2014; 194: 96-104.
[http://dx.doi.org/10.1016/j.snb.2013.12.060]
[30]
Lim AS, Atrens A. ESCA studies of nitrogen-containing stainless steels. Appl Phys, A Solids Surf 1990; 51(5): 411-8.
[http://dx.doi.org/10.1007/BF00348382]
[31]
Jadhav H, Suryawanshi S, More MA, Sinha S. Pulsed laser deposition of tin oxide thin films for field emission studies. Appl Surf Sci 2017; 419: 764-9.
[http://dx.doi.org/10.1016/j.apsusc.2017.05.020]
[32]
Yang WP, Costa D, Marcus P. Resistance to pitting and chemical composition of passive films of a Fe‐17%Cr alloy in chloridecontaining acid solution. J Electrochem Soc 1994; 141(10): 2669-76.
[http://dx.doi.org/10.1149/1.2059166]
[33]
Sinha AK, Manna PK, Pradhan M, Mondal C, Yusuf SM, Pal T. Electronic Supplementary Information (ESI) tin oxide with tunable p-n heterojunction for UV and visible light photocatalytic activity. RSC Advances 2013; 4: 208-11.
[http://dx.doi.org/10.1039/C3RA42740D]
[34]
Lu F, Ji X, Yang Y, Deng W, Banks CE. Room temperature ionic liquid assisted well-dispersed core-shell tin nanoparticles through cathodic corrosion. RSC Advances 2013; 3(41): 18791-3.
[http://dx.doi.org/10.1039/c3ra43532f]
[35]
Alonso-Orts M, Sánchez AM, López I, Nogales E, Piqueras J, Méndez B. 3D and 2D growth of SnO 2 nanostructures on Ga 2 O 3 nanowires: Synthesis and structural characterization. CrystEngComm 2017; 19(41): 6127-32.
[http://dx.doi.org/10.1039/C7CE01311F]
[36]
Mohanta D, Ahmaruzzaman M. Tin oxide nanostructured materials: An overview of recent developments in synthesis, modifications and potential applications. RSC Advances 2016; 6(112): 110996-1015.
[http://dx.doi.org/10.1039/C6RA21444D]
[37]
Fei L, Lei S, Zhang WB, et al. Direct TEM observations of growth mechanisms of two-dimensional MoS2 flakes. Nat Commun 2016; 7(1): 12206.
[http://dx.doi.org/10.1038/ncomms12206] [PMID: 27412892]
[38]
Patil GE, Kajale DD, Gaikwad VB, Jain GH. Spray pyrolysis deposition of nanostructured tin oxide thin films. ISRN Nanotechnology 2012; 2012: 1-5.
[http://dx.doi.org/10.5402/2012/275872]
[39]
Barroso-Bogeat A, Alexandre-Franco M, Fernández-González C, Gómez-Serrano V. Preparation of activated carbon-metal (hydr)oxide photocatalysts under different heating conditions. Chemical aspects. Boletín del Grupo Español del Carbón 2016; 42: 22-6.
[40]
Zhang G, Liu M. Preparation of nanostructured tin oxide using a sol-gel process based on tin tetrachloride and ethylene glycol. J Mater Sci 1999; 34(13): 3213-9.
[http://dx.doi.org/10.1023/A:1004685907751]

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy