The Open Chemical Physics Journal
is an Open Access online journal, which publishes Research
articles, Reviews and Letters in the field of chemical physics,
aiming at providing the most complete and reliable source
of information on current developments in the field.
Manuscripts may be submitted directly to tocpj@benthamopen.org
Each peer-reviewed article that is published in a Bentham
OPEN Journal is universally and freely accessible via
the Internet in an easily readable and printable PDF format.
Online Manuscript Submission: An online submission
and tracking service via Internet facilitates a speedy
and cost-effective submission of manuscripts.1
The full manuscript has to be submitted online via
Bentham's Content Management System (CMS) at http://www.bentham-editorial.org/
View
Instructions
Alternatively, you may also submit your full manuscript by
e-mail to tocpj@benthamopen.org
Manuscripts must be submitted by one of the authors of the
manuscript, and should not be submitted by anyone on their
behalf. The principal/corresponding author will be required
to submit a Covering Letter along with the manuscript, on
behalf of all the co-authors (if any). The author(s) will
confirm that the manuscript (or any part of it) has not been
published previously or is not under consideration for publication
elsewhere. Furthermore, any illustration, structure or table
that has been published elsewhere must be reported, and copyright
permission for reproduction must be obtained.
For all online submissions, please provide your complete manuscript
in the form of a single zipped folder containing soft copies
of all the materials (main text in MS Word or Tex/LaTeX),
figures/illustrations in TIFF, PDF or JPEG, and chemical structures
drawn in ChemDraw (CDX)/ISISDraw (TGF) as separate files,
while a PDF version of the entire manuscript must also be
included, embedded with all the figures/illustrations/tables/chemical
structures etc.
A successful electronic submission of a manuscript will be
followed by a system-generated acknowledgement to the principal/corresponding
author within 72 hours of the dispatch of
the manuscript. Any questions with regards to the preparation
of and submission of your manuscript to the journal should
be addressed to tocpj@benthamopen.org
and copied to managingeditor@benthamopen.org
NOTE: Any queries therein should be addressed
to oa@benthamscience.org
and copied to Jalil@benthamscience.org
Manuscript Preparation:
The manuscript should be written in English in a clear, direct
and active style. All pages must be numbered sequentially,
facilitating in the reviewing and editing of the manuscript.
For further convenience, the customer support team available
at Bentham Publishing Services (www.benthampublishingservices.com)
can provide assistance to authors for the preparation of manuscripts.
Manuscript Length:
Research Articles: The total number of words
for a published research article is from 4000 to 8000 words.
Review Articles: The total number of words
for a published comprehensive review article article is from
8000 to 40000 words, and for mini-review articles from 3000
to 6000 words.
Letter Articles: The total number of words
for a published letter/short communication article is from
3000 to 6000 words.
There is no restriction on the number of figures, tables or
additional files e.g. video clips, animation and datasets,
that can be included with each article online. Authors should
include all relevant supporting data with each article.
Manuscripts Published: The Journal accepts letter
acticles, original research articles, and mini- and full-length
review articles written in English. Supplements, proceedings
of conferences and book reviews may also be considered for
publication.
Supplements Thematic Issues: The journal also considers Supplements /Thematic issues for publication. The Guest Edited Thematic Issues are published free of charge.
A Supplements/Single topic will be a collection of articles (minimum of 6, maximum of 20 articles) based on a contemporary theme or topic of great importance to the field. Mini-supplements consisting of between 3 to 5 articles are also welcome. A Supplement can consist of either all review articles or a mixture of review and research articles. The Guest Editors' main editorial task is to invite the contributors to the Supplement and to manage the peer review of submitted manuscripts. A short summary or proposal for editing a supplement should be submitted to the Editor-in-Chief at e-mail to tocpj@benthamopen.org
with a copy to specialissue@benthamopen.org
Conference Proceedings: For proposals to
publish conference proceedings in this journal, please contact
us at email: proceedings@benthamscience.org
Open Access Book Reviews: This journal publishes
open access reviews on recently published books (both print
and electronic) relevant to the journal. Publishers and authors
of books are invited to contact our book reviews editor at
tocpj@benthamopen.org
with book review requests. All submitted books will be reviewed
by an independent expert in the field.
MANUSCRIPT SECTIONS FOR PAPERS: Manuscripts
for research articles and letters submitted to the respective
journals should be divided into the following sections; however,
there can be an extension in the number of sections in review
articles in accordance with the requirements of the topic.
Covering letter
Title
Title page
Abstract
Key Words
Text organization
List of abbreviations (if any)
Glossary
Conflict of interest (if any)
Acknowledgements (if any)
References
Appendices
Figures/illustrations (if any)
Chemical Structures (if any)
Tables
Supportive/supplementary material (if any)
COVERING LETTER: It is a mandatory requirement
that a signed covering letter also be submitted along with
the manuscript by the author to whom correspondence is to
be addressed, delineating the scope of the submitted article
declaring the potential competing interests, acknowledging
contributions from authors and funding agencies, and certifying
that the paper is prepared according to the 'Instructions
for Authors'. All inconsistencies in the text
and in the reference section, and any typographical errors
must be carefully checked and corrected before the submission
of the manuscript. The article contains no such material or
information that may be unlawful, defamatory, fabricated,
plagiarized, or which would, if published, in any way whatsoever,
violate the terms and conditions as laid down in the agreement.
The authors acknowledge that the publishers have the legal
right to take appropriate action against the authors for any
such violation of the terms and conditions as laid down in
the agreement. Download the Covering letter
TITLE: The title should be precise and brief
and must not be more than 120 characters. Authors should avoid
the use of non-standard abbreviations. The title must be written
in title case except for articles, conjunctions and prepositions.
Authors should also provide a short ‘running title’.
Title Page: Title page should include paper
title, author(s) full name and affiliation, corresponding
author(s) names complete affiliation/address, along with phone,
fax and email.
ABSTRACT: The abstract
should not exceed 250 words for review and research papers
and should be limited to only 150 words for letters, summarizing
the essential features of the article. The use of abbreviations
should be reduced to a minimum and the references should not
be cited in the abstract.
Keywords: Please provide 6-8 keywords in
alphabetical order.
TEXT ORGANIZATION: The main text should begin
on a separate page and should be divided into separate sections.
For Research articles, the preparation of the main text must
be structured into separate sections as Introduction,
Materials and Methodology, Results, Discussion and Conclusion.
For Review and Letter articles, the manuscript should be divided
into title page, abstract and the main text. The text may
be subdivided further according to the areas to be discussed,
which should be followed by the Acknowledgement (if any) and
Reference sections. The review article should mention any
previous important reviews in the field and contain a comprehensive
discussion starting with the general background of the field.
It should then go on to discuss the salient features of recent
developments. The authors should avoid presenting material
which has already been published in a previous review. The
authors are advised to present and discuss their observations
in brief. The manuscript style must be uniform throughout
the text and 10 pt Times New Roman font should be used. The
full term for an abbreviation should precede its first appearance
in the text unless it is a standard unit of measurement. The
reference numbers should be given in square brackets in the
text. Non-assimilated words from Latin or other languages
should also be italicized e.g., per se, et al. etc.
Symbols and Units: Greek symbols and special
characters play a prominent role in the manuscript. These
symbols often undergo formatting changes and get corrupted
or lost during preparation of a manuscript for publication.
To ensure that all special characters used are embedded in
the text, these special characters should be inserted as a
symbol but should not be a result of any format styling (Symbol
font face) otherwise they will be lost during conversion to
PDF/XML2.
Authors are encouraged to consult reporting guidelines. These
guidelines provide a set of recommendations comprising a list
of items relevant to their specific research design. All kinds
of measurements should be reported only in International System
of Units (SI).
Mathematical Material:
Units:
The following guidelines for using units should be observed.
(1) The number (numeral) should be separated from the unit
followed by a full space, e.g., 1.8 MeV.
(2) The units should have a single form for both singular
and plural, i.e., 1.0 cm and 2.7 cm.
(3) The symbols for units should be printed in lower-case
roman type without periods. Units derived from proper names,
however, should be abbreviated with initial capital letters,
i.e., coulomb (C), Weber (Wb).
(4) The abbreviated form of a unit must be used after a number
given in numerals: 1 cm (not 1 centimeter) but the unit should
be written out in cases like “a few centimeters.”
(5) Decimal multiples of units should be indicated by the
use of prefixes. The combination of prefix and unit symbol
is treated as a single symbol. For instance, such a combination
can be raised to a power, i.e., cm2.
Compound units should be written ad 1 g cm2
or g cm2 s-2,
with a thin space between unit parts. Avoid ambiguous compound
units, e.g., 6 J/cm3/s. Write
instead, for example, 6 J cm-3
s-1.
Mathematical Symbols:
Mathematical symbols must be defined immediately where they
are introduced.
Characters:
Character fonts: The italic font should be used for
mathematical symbols (this is the default font in *TeX/LaTeX’s
math mode). In addition to variables and constants, the italic
font should be used for particle symbols, symbols of quantum
states, and group-theoretic designations.
Diacritical signs:
A diacritical sign is a marking placed directly above
or below symbols, e.g., the arrow in 
.
Subscripts and superscripts:
All available characters can be used as subscripts
or superscripts.
Position of a subscript or superscript is dictated by standard
notation.
Examples:
Abbreviations in math:
Some abbreviations, such as those for mathematical
functions and those used in superscripts or subscripts require
special handling and are discussed below.
Abbreviations designating mathematical functions:
•Roman multiletter abbreviations must be closed
up to the argument following and separated from any preceding
symbol by a thin space, that is,
•To treat a function of a function enclose it in
bold round parentheses, i.e.,
g(f(x))
•e and exp (for exponent) notation
The e form is appropriate when the argument is short and
simple, i.e., eik·r, whereas exp should be used
if the argument is more complicated.
Equation breaking (multilinear equations):
Mathematical expressions often need to be displayed
on two or more lines (“broken”)
The best place for a break is just before an operator or
sign of relation. These signs should begin the next line
of the equation.
Equation numbering:
A principal equation and subordinate equations
may be numbered (1), (1a), (1b), etc.
Bracketing and Grouping sequence:
For the purpose of grouping, the sequence of bracketing
preferred is {[()]}, working outwards in sets ( ), [ ],
and {}.
{ [ ( { [ ( ) ] } ) ] }
Limits and indices:
In text, however, space limitations require that
single limit sums or integrals use subscripts and superscripts,
for example 
Fractions:
Fractions can be “built up” with a fraction bar,
, “slashed”
with a solidus, (a + b)/c, or written with a negative exponent,
(a + b)c-1. In text all fractions must be either
slashed or written with a negative exponent.
Multiplication signs:
The primary use of the multiplication sign is to
indicate a vector product of three-vectors (e.g., k
x A). Do not use it to express a simple product.
The center dot (•) should not be used to mean a simple
product. Use the dot to represent inner products of vectors
(k • r).
Mathematical terms:
The use of the following standard symbols is recommended.
LIST OF ABBREVIATIONS: If abbreviations are
used in the text either they should be defined in the text
where first used, or a list of abbreviations can be provided.
CONFLICT OF INTEREST: Financial contributions
to the work being reported should be clearly acknowledged,
as should any potential conflict of interest.
ACKNOWLEDGEMENTS: Please acknowledge anyone
(individual/company/institution) who has contributed to the
study by making substantial contributions to conception, design,
acquisition of data, or analysis and interpretation of data,
or who was involved in drafting the manuscript or revising
it critically for important intellectual content. Please list
the source(s) of funding for the study, for each author, and
for the manuscript preparation in the acknowledgements section.
REFERENCES: References must be listed in
the numerical system (Vancouver). All references should be
numbered sequentially [in square brackets] in the text and
listed in the same numerical order in the reference section.
The reference numbers must be finalized and the bibliography
must be fully formatted before submission.
See below few examples of references listed in the correct
Vancouver style:
Typical Paper Reference:
[1] Hedberg A, Ehrenberg A. Resolution enhancement of ESR
spectra from irradiated single crystals of glycine. J Chem
Phys 1968; 48: 4822-8.
[2] Kaczynski R, Grabowska-Olszewska B. Soil mechanics of
the potentially expansive clays in Poland. Appl Clay Sci 1997;
11: 337-55.
Typical Chapter Reference:
[3] Piecuch P, Wloch M, Varandas AJC. Renormalized coupled
cluster methods: Theoretical foundations and application to
potential function of water. In: Lahmar S, Maruani J, Wilson
S, Delgado-Barrio G, Eds. Progress in theoretical chemistry
and physics, Springer, Berlin, 2007; vol. 16: pp. 65-133.
Book Reference:
[4] Abramowitz M, Stegun I. Handbook of Mathematical Functions.
Dover: New York; 1965.
Edited Book:
[5] Ibach H, Mills DL, editors. Electron Energy Loss Spectroscopy
and Surface Vibrations. Academic Press: New York; 1982.
Conference Proceedings:
[6] Leigh C, Androula N, Vitali P. Physica Status Solidi (A):
Proceedings of the 3rd International Conference Porous Semiconductors
- Science and Technology; May 2003; WILEY VCH Verlag, Berlin,
GmbH, Germany; 2003.
Journal Article on the Internet:
[7] Zhang X, Zhang ZL, Glotzer SC. Simulation study of cyclic
tethered nanocube self-assemblies: effect of tethered nanocube
architectures. Nanotechnology [115706]. 21 March 2007, 18(11):
Available from: http://stacks.iop.org/Nano/18/115706
Patents:
[8] Kim D-W, Oh J-H. Methods for manufacturing capacitors
for semiconductor devices. US20070069271A1, March 29, 2007.
E-citations:
[9] Citations for articles/material published exclusively
online or in open access (free-to-view), must contain the
exact Web addresses (URLs) at the end of the reference(s),
except those posted on an author’s Web site unless editorially
essential, e.g. ‘Reference: Available from: URL’.
Some important points to remember:
*All references must be complete and accurate.
*If the number of authors exceeds six then et al.
will be used after three names (the term “et al.”
should be in italics).
*Online citations should include the date of access.
*Journal abbreviations should follow the Index Medicus/MEDLINE.
*Take special care of the punctuation convention as described
in the above-mentioned examples.
*Avoid using superscript in the in-text citations and reference
section.
*Abstracts, unpublished data and personal communications
(which can only be included if prior permission has been obtained)
should not be given in the reference section but they may
be mentioned in the text and details provided as footnotes.
*The authors are encouraged to use a recent version of EndNote
(version 5 and above) or Reference Manager (version 10) when
formatting their reference list, as this allows references
to be automatically extracted.
APPENDICES: In case there is a need to present
lengthy, but essential methodological details, use appendices,
which can be a part of the article. An appendix must not exceed
three pages (Times New Roman, 12 point fonts, 900 max. words
per page).The information should be provided in a condensed
form, ruling out the need of full sentences. A single appendix
should be titled APPENDIX, while more than one can be titled
APPENDIX A, APPENDIX B, and so on.
FIGURES/ ILLUSTRATIONS: The authors should
provide the illustrations as separate files, as well as embedded
in the text file, numbered consecutively in the order of their
appearance. Each figure should include a single illustration.
No charges will be levied on the use of color figures except
in the reprints. Each figure should be closely cropped to
minimize the amount of white space surrounding the illustration.
If a figure consists of separate parts, it is important that
a single composite illustration file be submitted, containing
all parts of the figure.
Photographs should be provided with a scale bar if appropriate,
as well as high-resolution component files.
Scaling/Resolution:
For Line Art image type, which is generally an image based
on lines and text and does not contain tonal or shaded areas,
the preferred file format is TIFF or EPS, with colour mode
being Monochrome 1-bit or RGB, in a resolution of 900-1200
dpi.
For Halftone image type, which is generally a continuous tone photograph and contains no text, the preferred file format is TIFF, with colour mode being or RGB or Grayscale, with a minimum resolution of 300 dpi.
For Combination image type, which is generally an image
containing halftone in addition to text or line art elements,
the preferred file format is TIFF, with colour mode being
or RGB or Grayscale, in a resolution of 500-900 dpi.
Formats:
For illustrations, the following file formats are acceptable:
• Illustrator
• EPS (preferred format for diagrams)
• PDF (also especially suitable for
diagrams)
• PNG (preferred format for photos
or images)
• Microsoft Word (version 5 and above;
figures must be a single page)
• PowerPoint (figures must be a single
page)
• TIFF
• JPEG (conversion should be done using
the original file)
• BMP
• CDX (ChemDraw)
• TGF (ISIS/Draw)
Bentham OPEN does not process figures submitted
in GIF format.
If the large size of TIFF or EPS figures acts as an obstacle
to online submission, authors may find that conversion to
JPEG format before submission results in significantly reduced
file size and upload time, while retaining acceptable quality.
JPEG is a 'lossy' format, however in order to maintain acceptable
image quality, it is recommended that JPEG files are saved
at High or Maximum quality.
Files should not be compressed with tools such as Zipit or
Stuffit prior to submission as these tools will in any case
produce negligible file-size savings for JPEGs and TIFFs,
which are already compressed.
Image Conversion Tools:
There are many software packages, many of them freeware or
shareware, capable of converting to and from different graphics
formats, including PNG.
Good general tools for image conversion include GraphicConverter
on the Macintosh, PaintShop Pro, for Windows, and ImageMagick,
which is available on Macintosh, Windows and UNIX platforms.
Note that bitmap images (e.g. screenshots) should not be converted
to EPS, since this will result in a much larger file size
than the equivalent JPEG, TIFF, PNG or BMP, with no increase
in the quality. EPS should only be used for images produced
by vector-drawing applications such as Adobe Illustrator or
CorelDraw. Most vector-drawing applications can be saved in,
or exported as, EPS format. In case the images have been originally
prepared in an Office application, such as Word or PowerPoint,
then the original Office files should be directly uploaded
to the site, instead of being converted to JPEG or another
format that may be of low quality.
Chemical Structures: Chemical structures
MUST be prepared according to the guidelines below.
Structures should be prepared in ChemDraw and provided as
separate file, submitted both on disk and in printed formats.
Structure Drawing Preferences:
[As according to the ACS style sheet]
Drawing Settings:
Chain angle 120°
Bond spacing 18% of width
Fixed length 14.4 pt (0.500cm,
0.2in)
Bold width 2.0
pt (0.071cm, 0.0278in)
Line width 0.6
pt (0.021cm, 0.0084in)
Margin width 1.6 pt (0.096cm)
Hash spacing 2.5 pt (0.088cm, 0.0347in)
Text settings:
Font Times
New Roman
Size
8 pt
Under the Preference Choose:
Units points
Tolerances 3
pixels
Under Page Setup Use:
Paper US
letter
Scale
100%
TABLES:
*Data Tables should be submitted in Microsoft Word table format.
*Each table should include a title/caption being explanatory
in itself with respect to the details discussed in the table.
Detailed legends may then follow.
*Table number in bold font i.e. Table 1,
should follow a title. The title should be in small case with
the first letter in caps. A full stop should be placed at
the end of the title.
*Tables should be embedded in the text exactly according to
their appropriate placement in the submitted manuscript.
*Columns and rows of data should be made visibly distinct
by ensuring that the borders of each cell are displayed as
black lines.
*Tables should be numbered in Arabic numerals sequentially
in order of their citation in the body of the text.
*If a reference is cited in both the table and text, please
insert a lettered footnote in the table to refer to the numbered
reference in the text.
*Tabular data provided as additional files can be submitted
as an Excel spreadsheet.
SUPPORTIVE/SUPPLEMENTARY MATERIAL:
We do encourage to append supportive material, for example
a PowerPoint file containing a talk about the study, a PowerPoint
file containing additional screenshots, a Word, RTF, or PDF
document showing the original instrument(s) used, a video,
or the original data (SAS/SPSS files, Excel files, Access
Db files etc.) provided it is inevitable or endorsed by the
journal's Editor.
Supportive/Supplementary material intended for publication
must be numbered and referred to in the manuscript but should
not be a part of the submitted paper. In-text citations as
well as a section with the heading "Supportive/Supplementary
Material" before the "References" section should
be provided. Here, list all Supportive/Supplementary Material
and include a brief caption line for each file describing
its contents.
Any additional files will be linked into the final published
article in the form supplied by the author, but will not be
displayed within the paper. They will be made available in
exactly the same form as originally provided only on our Web
site. Please also make sure that each additional file is a
single table, figure or movie (please do not upload linked
worksheets or PDF files larger than one sheet). Supportive/Supplementary
Material must be provided in a single zipped file not larger
than 4 MB.
Authors must clearly indicate if these files are not for publication
but meant for the reviewers'/editors' perusal only.
PERMISSION FOR REPRODUCTION: Published/reproduced
material should not be included unless you have obtained written
permission from the copyright holder, which should be forwarded
to the Editorial Office in case of acceptance of your article
for publication.
For obtaining permission for reproducing any material published
in an article by Bentham Science Publishers, please fill in
the request FORM
and send to tocpj@benthamopen.org
for consideration.
AUTHORS AND INSTITUTIONAL AFFILIATIONS:
The author will be required to provide their full names, the
institutional affiliations and the location, with an asterisk
in front of the name of the principal/corresponding author.
The corresponding author(s) should be designated and their
complete address, business telephone and fax numbers and e-mail
address must be stated to receive correspondence and galley
proofs.
REVIEWING AND PROMPTNESS OF PUBLICATION:
All manuscripts submitted for publication will be immediately
subjected to peer-reviewing, usually in consultation with
the members of the Editorial Advisory Board and a number of
external referees. Authors may, however, provide in their
Covering Letter the contact details (including e-mail addresses)
of four potential peer reviewers for their paper. Any peer
reviewers suggested should not have recently published with
any of the authors of the submitted manuscript and should
not be members of the same research institution.
All peer-reviewing will be conducted via the Internet
to facilitate rapid reviewing of the submitted manuscripts.
Every possible effort will be made to assess the manuscripts
quickly with the decision being conveyed to the authors in
due course. Papers which are delayed by authors in revision
for more than 30 days will have to be re-submitted as a new
submission.
LANGUAGE AND EDITING: Manuscripts submitted
containing many English typographical errors will not be published.
Manuscripts which are accepted for publication on condition
that the written English submitted is corrected, will be sent
a quote by Eureka
Science, a professional language editing company. Authors
from non-English language countries who have poor English
language written skills, are advised to contact the language
editing company prior to submitting their manuscript to the
journal. Please contact Eureka
Science for a language editing quote at e-mail: info@eureka-science.com
stating the total number of words of the article to be edited.
언어 및 편집: 영문 오타가 많은 원고는 출판되지 않을 것입니다. 영문 오타를 없애겠다는 조건으로 받은 원고는 영어 편집 전문회사인 유럽 공동 기술개발 기구로부터 가격 견적서가 보내 질 것입니다. 영어 작문에 어려움이 있는 비영어권 국가의 저자들은 원고를 학술지에 제출하기 전에 영어 편집회사와 접촉할 것을 권합니다. 영어 편집 견적서를 받기 위해서 교정될 원고의 단어수를 적은 메일을 유럽 공동 기술개발 기구 메일인 info@eureka-science.com로 보내시기 바랍니다.
语言和编辑: 含有很多英文印刷错误的提交稿将不予发表。接受发表的稿件其英文写作应是正确的；专业的语言编辑公司（尤里卡科学），可对稿件的英文润色提供报价。建议非英语国家、且英文写作欠佳的作者在投稿前先与语言编辑公司联系。请与尤里卡科学联系 info@eureka-science.com
EDITION ET LANGUE: Les manuscrits soumis avec plusieurs erreurs typographiques en Anglais ne seront pas publiés en l’état. Les manuscrits sont acceptés pour publication à la condition que l'anglais utilisé soit corrigé après la soumission et seront envoyés pour examen à Eureka Science, une société d'édition de langue professionnelle. Les auteurs en provenance de pays où la langue est différente de l'anglais et qui ont de médiocres compétences en anglais écrit, sont priés de contacter la société d'édition de langue avant de soumettre leur manuscrit à la revue. Merci de contacter Eureka Science à info@eureka-science.com pour un devis en indiquant le nombre total de mot de l’article à éditer.
PROOF CORRECTIONS: Authors are required to
proofread the PDF versions of their manuscripts before submission.
To avoid delays in publication, proofs should be checked immediately
for typographical errors and returned within 48
hours. Major changes are not acceptable at the proof stage.
If unable to send corrections within 48 hours
due to some reason, the author(s) must at least send an acknowledgement
on receiving the galley proofs or the article will be published
exactly as received and the publishers will not be responsible
for any error occurring in the manuscript in this regard.
The corresponding author will be solely responsible for ensuring
that the revised version of the manuscript incorporating all
the submitted corrections receives the approval of all the
authors of the manuscript.
COPYRIGHT: Authors who publish in Bentham
OPEN Journals retain copyright to their work. Submission
of a manuscript to the respective journals implies that all
authors have read and agreed to the content of the Covering
Letter or the Terms and Conditions. It is a condition of publication
that manuscripts submitted to this journal have not been published
and will not be simultaneously submitted or published elsewhere.
Plagiarism is strictly forbidden, and by submitting the article
for publication the authors agree that the publishers have
the legal right to take appropriate action against the authors,
if plagiarism or fabricated information is discovered. Once
submitted to the journal, the author will not withdraw their
manuscript at any stage prior to publication.
Articles are licensed under the terms of the Creative Commons
Attribution non-commercial License (http://creativecommons.org/licenses/by-nc/3.0/)
which permits unrestricted, non-commercial use, distribution
and reproduction in any medium, providing that the work is
properly cited.
Plagiarism Prevention: Bentham Science Publisher
uses the iThenticate software to detect instances of overlapping
and similar text in submitted manuscripts. iThenticate software
checks content uploaded by a journal editorial office against
a database of periodicals, the Internet, and a comprehensive
article database. It generates a similarity report, including
the percentage overlap between the uploaded article and published
material. Any instances of content overlap are treated according
to a journal's peer review integrity statement and the policies
recommended by the editorial Committee. You are assured that
the publisher, where you are submitting your manuscript, is
committed to actively combating plagiarism and publishing
original research.
PUBLICATION FEES: The publication fee for each published Article / Book Review / Letter is US$ 250.
Once the paper is accepted for publication, the author will
receive by email an electronic invoice. The fee form is
also available on the Web site at www.benthamscience.com/open/feeform.
MEMBERSHIP: Join as a member of Bentham OPEN
today to obtain great discounts on your article publication
fees! For details click
here.
REPRINTS: High quality printed reprints of
published articles are available for purchase, if ordered,
with a minimum number of 100 reprints.
1 The submission process
is compatible with version 3.0 or later of Internet Explorer
and Netscape Navigator, and with most other modern Web browsers.
It can be used from PC, Mac, or Unix platforms.
2 In this connection, we
recommend the use of Microsoft Word version 2000 and above.
