The Open Corrosion Journal is
an Open Access online journal, which publishes Research
articles, Reviews and Letters in the field of metallic and
non-metallic corrosion, aiming at providing the most complete
and reliable source of information on current developments
in the field.
Manuscripts may be submitted directly to tocorrj@benthamopen.org
Each peer-reviewed article that is published in a Bentham
OPEN Journal is universally and freely accessible via
the Internet in an easily readable and printable PDF format.
Online Manuscript Submission:
An online submission and tracking service via Internet facilitates
a speedy and cost-effective submission of manuscripts.1
The full manuscript has to be submitted online via Bentham's
Content Management System (CMS) at http://www.bentham-editorial.org/
View
Instructions
Alternatively you may also submit your full manuscript by
e-mail to tocorrj@benthamopen.org
Manuscripts must be submitted by one of the authors of the
manuscript, and should not be submitted by anyone on their
behalf. The principal/corresponding author will be required
to submit a Covering Letter along with the manuscript, on
behalf of all the co-authors (if any). The author(s) will
confirm that the manuscript (or any part of it) has not
been published previously or is not under consideration
for publication elsewhere. Furthermore, any illustration,
structure or table that has been published elsewhere must
be reported, and copyright permission for reproduction must
be obtained.
For all online submissions, please provide your complete
manuscript in the form of a single zipped folder containing
soft copies of all the materials (main text in MS Word or
Tex/LaTeX), figures/illustrations in TIFF, PDF or JPEG,
and chemical structures drawn in ChemDraw (CDX)/ISISDraw
(TGF) as separate files, while a PDF version of the entire
manuscript must also be included, embedded with all the
figures/illustrations/tables/chemical structures etc.
A successful electronic submission of a manuscript will
be followed by a system-generated acknowledgement to the
principal/corresponding author within 72
hours of the dispatch of the manuscript. Any questions with
regards to the preparation of and submission of your manuscript
to the journal should be addressed to tocorrj@benthamopen.org
and copied to managingeditor@benthamopen.org
NOTE: Any queries therein should be addressed
to oa@benthamscience.org
and copied to Jalil@benthamscience.org
Manuscript Preparation: The manuscript
should be written in English in a clear, direct and active
style. All pages must be numbered sequentially, facilitating
in the reviewing and editing of the manuscript.
For further convenience, the customer support team available
at Bentham Publishing Services (www.benthampublishingservices.com)
can provide assistance to authors for the preparation of
manuscripts.
Manuscript Length:
Research Articles: The total number of words
for a published research article is from 4000 to 8000 words.
Review Articles: The total number of words
for a published comprehensive review article article is from
8000 to 40000 words, and for mini-review articles from 3000
to 6000 words.
Letter Articles: The total number of words for a
published letter/short communication article is from 3000
to 6000 words.
There is no restriction on the number of figures, tables
or additional files e.g. video clips, animation and datasets,
that can be included with each article online. Authors should
include all relevant supporting data with each article.
Manuscripts Published: The journal
accepts letters/short communications, original research
articles, and mini and full-length review articles written
in English. Supplements, proceedings of conferences and
book reviews may also be considered for publication.
Supplements/Single Topic Issues: The journal
also considers Supplements/Single topic issues for publication.
A Supplements/Single topic will be a collection of articles
(minimum of 6, maximum of 20 articles) based on a contemporary
theme or topic of great importance to the field. Mini-supplements
consisting of between 3 to 5 articles are also welcome.
A Supplement can consist of either all review articles
or a mixture of review and research articles. The Guest
Editors' main editorial task is to invite the contributors
to the Supplement and to manage the peer review of submitted
manuscripts. A short summary or proposal for editing a supplement
should be submitted to the Editor-in-Chief at e-mail to
tocorrj@benthamopen.org
with a copy to specialissue@benthamopen.org
Conference Proceedings: The journal will
consider for publication proceedings of relevant conferences
in the field. Proposals for publishing conference proceedings
should be submitted to the Editor at e-mail tocorrj@benthamopen.org
with a copy to oa@benthamscience.org
Open Access Book Reviews: This journal
publishes open access reviews on recently published books
(both print and electronic) relevant to the journal. Publishers
and authors of books are invited to contact our book reviews
editor at tocorrj@benthamopen.org
with book review requests. All submitted books will be reviewed
by an independent expert in the field.
MANUSCRIPT SECTIONS FOR PAPERS: Manuscripts
for research articles and letters submitted to the journal
should be divided into the following sections; however,
there can be an extension in the number of sections in review
articles in accordance with the requirements of the topic.
Covering letter
Title page
Abstract
Keywords
Text organization
List of abbreviations (if any)
Conflict of interest (if any)
Acknowledgements (if any)
References
Appendices
Figures/illustrations (if any)
Chemical structures (if any)
Tables and captions (if any)
Supportive/supplementary Material (if any)
COVERING LETTER: It is a mandatory
requirement that a signed covering letter also be submitted
along with the manuscript by the author to whom correspondence
is to be addressed, delineating the scope of the submitted
article declaring the potential competing interests, acknowledging
contributions from authors and funding agencies, and certifying
that the paper is prepared according to the 'Instructions
for Authors'. All inconsistencies in
the text and in the reference section, and any typographical
errors must be carefully checked and corrected before the
submission of the manuscript. The
article contains no such material or information that
may be unlawful, defamatory, fabricated, plagiarized, or
which would, if published, in any way whatsoever, violate
the terms and conditions as laid down in the agreement. The
authors acknowledge that the publishers have the legal
right to take appropriate action against the authors for
any such violation of the terms and conditions as laid down
in the agreement. Download
the Covering letter
TITLE: The title should be precise and
brief and must not be more than 120 characters. Authors
should avoid the use of non standard abbreviations. The
title must be written in title case except for articles,
conjunctions and prepositions.
Authors should also provide a short ‘running title’.
ABSTRACT: The abstract should not exceed 250 words
for review and research papers and should be limited to
only 50 words for letters, summarizing the essential features
of the article. The use of abbreviations should be reduced
to a minimum and the references should not be cited in the
abstract.
KEYWORDS: Provide 6 to 8 keywords in alphabetical
order.
TEXT ORGANIZATION: The main text should begin on
a separate page and should be divided into separate sections.
For Research articles, the preparation of the main text
must be structured into separate sections as Introduction,
Materials and Methodology, Results, Discussion and Conclusion.
For Review and Letter articles, the manuscript should be
divided into title page, abstract and the main text. The
text may be subdivided further according to the areas to
be discussed, which should be followed by the Acknowledgement
(if any) and Reference sections. The review article should
mention any previous important reviews in the field and
contain a comprehensive discussion starting with the general
background of the field. It should then go on to discuss
the salient features of recent developments. The authors
should avoid presenting material which has already been
published in a previous review.
Symbols and Units: Greek symbols and special
characters play a prominent role in the manuscript. These
symbols often undergo formatting changes and get corrupted
or lost during preparation of a manuscript for publication.
To ensure that all special characters used are embedded
in the text, these special characters should be inserted
as a symbol but should not be a result of any format styling
(Symbol font face) otherwise they will be lost
during conversion to PDF/XML.2
Authors are encouraged to consult reporting guidelines.
These guidelines provide a set of recommendations comprising
a list of items relevant to their specific research design.
All kinds of measurements should be reported only in International
System of Units (SI).
Equations and Mathematical Expressions:
1. Avoid the use of built-up fractions in the text.
If not avoided by the author(s), built-up fractions will
be converted to equivalent expressions on the line when
the paper is copyedited. In display matter, however, built-up
fractions are preferred for clarity.
2. Avoid the use of small-type mathematical expressions
centered above or below arrows. If possible, try to use
an alternative format.
3. In the exponential function, avoid exponents having more
than one or two characters.
4. Avoid the use of reference numbers for equations that
are not subsequently referred to in the paper. Costs are
reduced if short mathematical equations and other expressions
in the text are run in (instead of each being displayed
on a separate line). Authors must expect that, when accepted
papers are copyedited, "excess" equation reference
numbers will be deleted and short equations will be run
in with text.
5. Be sure to indicate special marking for symbols (e.g.,
italics, boldface) and clearly identify any unusual symbols.
Try to avoid underscored symbols because they often require
hand composition and opening up lines and thus are expensive.
In vector notations, indicate which letters or notations,
if any, may be set in boldface type. Indicate if asterisks
are to be set in superscript position or centered on the
line.
6. All equations should be indented and numbered
as follows: (1)
7. Equation number should be right justified. Put three
dots(...) midway between the end of the equation and the
equation number.
8. Punctuation should not be used at the end of an equation.
9. Particular care should be taken to distinguish between
the number zero (0) and the letter O; the number one (1)
and the letter l, the Roman letter v and the Greek letter
nu (n). The decimal logarithm should be written "log"
and the natural log "ln". The abbreviation of
the exponential function is a roman e (for example, ex
) or exp (for example, exp (u2
+ n)). In expressions of the type dxdt, the letter
d (derivative function) is always written in roman, whereas
the physical parameter (x or t) is always in italics.
Numbers are written in numerals when they are followed by
units, these being represented by their SI symbols (10 %
but a few percent).
10. In numerals, each group of three letters should be separated
by a space (except for dates and postal codes).
11. Authors should provide the equations in *TeX/LaTeX file
format separately as well as embedded in the manuscript.
Mathematical Symbols:
Mathematical symbols must be defined immediately where they
are introduced.
Characters:
Character fonts:
The italic font should be used for mathematical
symbols (this is the default font in *TeX/LaTeX’s
math mode). In addition to variables and constants, the
italic font should be used for particle symbols, symbols
of quantum states, and group theoretic designations.
Diacritical signs:
A diacritical sign is a marking placed directly
above or below symbols, e.g., the arrow in 
.
Subscripts and superscripts:
All available characters can be used as subscripts
or superscripts.
Position of a subscript or superscript is dictated by standard
notation.
Examples:
Abbreviations in math:
Some abbreviations, such as those for mathematical
functions and those used in superscripts or subscripts require
special handling and are discussed below.
Abbreviations designating mathematical functions:
•Roman multiletter abbreviations must be
closed up to the argument following and separated from any
preceding symbol by a thin space, that is,
• To treat a function of a function enclose it in
bold round parentheses, i.e.,
g(f(x))
• e and exp (for exponent) notation
The e form is appropriate when the argument is short and simple,
i.e., eik·r, whereas exp should be used if the
argument is more complicated.
Equation numbering:
A principal equation and subordinate equations may
be numbered (1), (1a), (1b), etc.
Bracketing and Grouping sequence:
For the purpose of grouping, the sequence of bracketing
preferred is {[()]}, working outwards in sets ( ), [ ], and
{}.
{ [ ( { [ ( ) ] } ) ] }
Limits and indices:
In text, however, space limitations require that single limit
sums or integrals use subscripts and superscripts, for example
Fractions:
Fractions can be “built up” with a fraction bar,
(a + b)/c, “slashed” with a solidus, (a
+ b)/c, or written with a negative exponent, (a + b)c-1.
In text all fractions must be either slashed or written with
a negative exponent.
Multiplication signs:
The primary use of the multiplication sign is to indicate
a vector product of three-vectors (e.g., k x A).
Do not use it to express a simple product.
The center dot (•) should not be used to mean a simple
product. Use the dot to represent inner products of vectors
(k • r).
Mathematical terms:
The use of the following standard symbols is recommended.
LIST OF ABBREVIATIONS: If abbreviations are
used in the text either they should be defined in the text
where first used, or a list of abbreviations can be provided.
CONFLICT OF INTEREST: Financial contributions to
the work being reported should be clearly acknowledged, as
should any potential conflict of interest.
ACKNOWLEDGEMENTS: Please acknowledge anyone
(individual/company/institution) who has contributed to the
study by making substantial contributions to conception, design,
acquisition of data, or analysis and interpretation of data,
or who was involved in drafting the manuscript or revising
it critically for important intellectual content. Please list
the source(s) of funding for the study, for each author, and
for the manuscript preparation in the acknowledgements section.
REFERENCES: References must be listed in the numerical
system (Vancouver). All references should be numbered sequentially
[in square brackets] in the text and listed in the same numerical
order in the reference section. The reference numbers must
be finalized and the bibliography must be fully formatted
before submission.
See below few examples of references listed in the correct
Vancouver style:
Typical Paper Reference:
[1] Hedberg A, Ehrenberg A. Resolution enhancement
of ESR spectra from irradiated single crystals of glycine.
J Chem Phys 1968; 48: 4822-8.
[2] Kaczynski R, Grabowska-Olszewska B. Soil mechanics of
the potentially expansive clays in Poland. Appl Clay Sci 1997;
11: 337-55.
Typical Chapter Reference:
[3] Piecuch P, Wloch M, Varandas AJC. Renormalized
coupled cluster methods: Theoretical foundations and application
to potential function of water. In: Lahmar S, Maruani J, Wilson
S, Delgado-Barrio G, Eds. Progress in theoretical chemistry
and physics. Springer: Berlin 2007; vol. 16: pp. 65-133.
Book Reference:
[4] Abramowitz M, Stegun I. Handbook of mathematical
functions. Dover: New York 1965.
Edited Book:
[5] Ibach H, Mills DL, Eds. Electron energy loss spectroscopy
and surface vibrations. Academic Press: New York 1982.
Conference Proceedings:
[6] Leigh C, Androula N, Vitali P. Physica Status
Solidi (A): Proceedings of the 3rd International Conference
Porous Semiconductors - Science and Technology; May 2003;
WILEY VCH Verlag, Berlin, GmbH: Germany 2003.
Journal Article on the Internet:
[7] Zhang X, Zhang ZL, Glotzer SC. Simulation study
of cyclic tethered nanocube self-assemblies: effect of tethered
nanocube architectures. Nanotechnology [115706]. 21 March
2007, 18(11): Available from: http://stacks.iop.org/Nano/18/115706
Patents:
[8] Kim D-W, Oh J-H. Methods for manufacturing capacitors
for semiconductor devices. US20070069271A1, March 29, 2007.
E-citations:
[9] Citations for articles/material published exclusively
online or in open access (free-to-view), must contain the
exact Web addresses (URLs) at the end of the reference(s),
except those posted on an author’s Web site unless editorially
essential, e.g. ‘Reference: Available from: URL’.
Some important points to remember:
*All references must be complete and accurate.
*If the number of authors exceeds six then et al.
will be used after three names (the term “et al.”
should be in italics).
*Online citations should include the date of access.
*Journal abbreviations should follow the Index Medicus/MEDLINE.
*Take special care of the punctuation convention as described
in the above-mentioned examples.
*Avoid using superscript in the in-text citations and reference
section.
*Abstracts, unpublished data and personal communications
(which can only be included if prior permission has been
obtained) should not be given in the reference section but
they may be mentioned in the text and details provided as
footnotes.
*The authors are encouraged to use a recent version of EndNote
(version 5 and above) or Reference Manager (version 10)
when formatting their reference list, as this allows references
to be automatically extracted.
APPENDICES: In case there is a need to
present lengthy, but essential methodological details, use
appendixes, which can be a part of the article. An appendix
must not exceed three pages (Times New Roman, 12 point fonts,
900 max. words per page).The information should be provided
in a condensed form, ruling out the need of full sentences.
A single appendix should be titled APPENDIX, while more
than one can be titled APPENDIX A, APPENDIX B, and so on.
FIGURES/ILLUSTRATIONS: The authors should provide
the illustrations as separate files, as well as embedded
in the text file, numbered consecutively in the order of
their appearance. Each figure should include a single illustration.
No charges will be levied on the use of color figures except
in the reprints. Each figure should be closely cropped to
minimize the amount of white space surrounding the illustration.
If a figure consists of separate parts, it is important
that a single composite illustration file be submitted,
containing all parts of the figure.
Photographs should be provided with a scale bar if appropriate,
as well as high-resolution component files.
Scaling/Resolution:
For Line Art image type, which is generally an
image based on lines and text and does not contain tonal
or shaded areas, the preferred file format is TIFF or EPS,
with colour mode being Monochrome 1-bit or RGB, in a resolution
of 900-1200 dpi.
For Halftone image type, which is generally a continuous
tone photograph and contains no text, the preferred file
format is TIFF, with colour mode being or RGB or Grayscale,
with a minimum resolution of 300 dpi.
For Combination image type, which is generally an image
containing halftone in addition to text or line art elements,
the preferred file format is TIFF, with colour mode being
or RGB or Grayscale, in a resolution of 500-900 dpi.
Formats:
For illustrations, the following file formats are
acceptable:
• Illustrator
• EPS (preferred format for diagrams)
• PDF (also especially suitable for
diagrams)
• PNG (preferred format for photos
or images)
• Microsoft Word (version 5 and above;
figures must be a single page)
• PowerPoint (figures must be a single
page)
• TIFF
• JPEG (conversion should be done
using the original file)
• BMP
• CDX (ChemDraw)
• TGF (ISIS/Draw)
Bentham OPEN does not process figures submitted
in GIF format.
If the large size of TIFF or EPS figures acts as an obstacle
to online submission, authors may find that conversion to
JPEG format before submission results in significantly reduced
file size and upload time, while retaining acceptable quality.
JPEG is a 'lossy' format, however. In order to maintain
acceptable image quality, it is recommended that JPEG files
are saved at High or Maximum quality.
Files should not be compressed with tools such as Zipit
or Stuffit prior to submission as these tools will in any
case produce negligible file-size savings for JPEGs and
TIFFs, which are already compressed.
Image Conversion Tools:
There are many software packages, many of them
freeware or shareware, capable of converting to and from
different graphics formats, including PNG.
Good general tools for image conversion include GraphicConverter
on the Macintosh, PaintShop Pro, for Windows, and ImageMagick,
which is available on Macintosh, Windows and UNIX platforms.
Note that bitmap images (e.g. screenshots) should not be
converted to EPS, since this will result in a much larger
file size than the equivalent JPEG, TIFF, PNG or BMP, with
no increase in the quality. EPS should only be used for
images produced by vector-drawing applications such as Adobe
Illustrator or CorelDraw. Most vector-drawing applications
can be saved in, or exported as, EPS format. In case the
images have been originally prepared in an Office application,
such as Word or PowerPoint, then the original Office files
should be directly uploaded to the site, instead of being
converted to JPEG or another format that may be of low quality.
Chemical Structures: Chemical structures MUST be
prepared according to the guidelines below.
Structures should be prepared in ChemDraw and provided as
separate file, submitted both on disk and in printed formats.
Structure Drawing Preferences:
[As according to the ACS style sheet]
Drawing Settings:
Chain angle 120°
Bond spacing 18% of width
Fixed length 14.4 pt
(0.500cm, 0.2in)
Bold width 2.0
pt (0.071cm, 0.0278in)
Line width 0.6
pt (0.021cm, 0.0084in)
Margin width 1.6 pt (0.096cm)
Hash spacing 2.5 pt (0.088cm, 0.0347in)
Text settings:
Font Times
New Roman
Size 8
pt
Under the Preference Choose:
Units points
Tolerances 3
pixels
Under Page Setup Use:
Paper US
letter
Scale 100%
TABLES:
*Data Tables should be submitted in Microsoft Word
table format.
*Each table should include a title/caption being explanatory
in itself with respect to the details discussed in the table.
Detailed legends may then follow.
*Table number in bold font i.e. Table 1,
should follow a title. The title should be in small case
with the first letter in caps. A full stop should be placed
at the end of the title.
*Tables should be embedded in the text exactly according
to their appropriate placement in the submitted manuscript.
*Columns and rows of data should be made visibly distinct
by ensuring that the borders of each cell are displayed
as black lines.
*Tables should be numbered in Arabic numerals sequentially
in order of their citation in the body of the text.
*If a reference is cited in both the table and text, please
insert a lettered footnote in the table to refer to the
numbered reference in the text.
*Tabular data provided as additional files can be submitted
as an Excel spreadsheet.
SUPPORTIVE/SUPPLEMENTARY MATERIAL:
We do encourage to append supportive material, for example
a PowerPoint file containing a talk about the study, a PowerPoint
file containing additional screenshots, a Word, RTF, or
PDF document showing the original instrument(s) used, a
video, or the original data (SAS/SPSS files, Excel files,
Access Db files etc.) provided it is inevitable or endorsed
by the journal's Editor.
Published/reproduced material should not be included unless
you have obtained written permission from the copyright
holder, which must be forwarded to the Editorial Office
in case of acceptance of your article for publication.
Supportive/Supplementary Material intended for publication
must be numbered and referred to in the manuscript but should
not be a part of the submitted paper. In-text citations
as well as a section with the heading "Supportive/Supplementary
Material" before the "References" section
should be provided. Here, list all Supportive/Supplementary
Material and include a brief caption line for each file
describing its contents.
Any additional files will be linked into the final published
article in the form supplied by the author, but will not
be displayed within the paper. They will be made available
in exactly the same form as originally provided only on
our Web site. Please also make sure that each additional
file is a single table, figure or movie (please do not upload
linked worksheets or PDF files larger than one sheet). Supportive/Supplementary
Material must be provided in a single zipped file not larger
than 4 MB.
Authors must clearly indicate if these files are not for
publication but meant for the reviewers'/editors' perusal
only.
PERMISSION FOR REPRODUCTION: Published/Reproduced
material should not be included unless you have obtained
written permission from the copyright holder, which should
be forwarded to the Editorial Office in case of acceptance
of your article for publication.
For obtaining permission for reproducing any material published
in an article by Bentham Science Publishers, please fill
in the request FORM
and send to tocorrj@benthamopen.org
for consideration.
AUTHORS AND INSTITUTIONAL AFFILIATIONS: The author
will be required to provide their full names, the institutional
affiliations and the location, with an asterisk in front
of the name of the principal/corresponding author. The corresponding
author(s) should be designated and their complete address,
business telephone and fax numbers and e-mail address must
be stated to receive correspondence and galley proofs.
REVIEWING AND PROMPTNESS OF PUBLICATION: All manuscripts
submitted for publication will be immediately subjected
to peer-reviewing, usually in consultation with the members
of the Editorial Advisory Board and a number of external
referees. Authors may, however, provide in their Covering
Letter the contact details (including e-mail addresses)
of four potential peer reviewers for their paper. Any peer
reviewers suggested should not have recently published with
any of the authors of the submitted manuscript and should
not be members of the same research institution.
All peer-reviewing will be conducted via the Internet to
facilitate rapid reviewing of the submitted manuscripts.
Every possible effort will be made to assess the manuscripts
quickly with the decision being conveyed to the authors
in due course.
LANGUAGE AND EDITING: Manuscripts submitted
containing many English typographical errors will not be published.
Manuscripts which are accepted for publication on condition
that the written English submitted is corrected, will be sent
a quote by Eureka
Science, a professional language editing company. Authors
from non-English language countries who have poor English
language written skills, are advised to contact the language
editing company prior to submitting their manuscript to the
journal. Please contact Eureka
Science for a language editing quote at e-mail: info@eureka-science.com
stating the total number of words of the article to be edited.
PROOF CORRECTIONS: Authors are required to proofread
the PDF versions of their manuscripts before submission.
To avoid delays in publication, proofs should be checked
immediately for typographical errors and returned within
48 hours. Major changes are not acceptable
at the proof stage. If unable to send corrections within
48 hours due to some reason, the author(s)
must at least send an acknowledgement on receiving the galley
proofs or the article will be published exactly as received
and the publishers will not be responsible for any error
occurring in the manuscript in this regard.
The corresponding author will be solely responsible for
ensuring that the revised version of the manuscript incorporating
all the submitted corrections receives the approval of all
the authors of the manuscript.
COPYRIGHT: Authors who publish
in Bentham OPEN Journals retain copyright to their work.
Submission of a manuscript to the respective journals implies
that all authors have read and agreed to the content of
the Covering Letter or the Terms and Conditions. It
is a condition of publication that manuscripts submitted
to this journal have not been published and will not be
simultaneously submitted or published elsewhere. Plagiarism
is strictly forbidden, and by submitting the article for
publication the authors agree that the publishers have the
legal right to take appropriate action against the authors,
if plagiarism or fabricated information is discovered. Once
submitted to the journal, the author will not withdraw their
manuscript at any stage prior to publication.
Articles are licensed under the terms of the Creative Commons
Attribution non-commercial License (http://creativecommons.org/licenses/by-nc/3.0/)
which permits unrestricted, non-commercial use, distribution
and reproduction in any medium, providing that the work
is properly cited.
PUBLICATION FEES: Bentham OPEN is pleased to announce
a 50% special discount on the article processing fee for
a limited period of 12 months. The discounted publication
fee details for each article published in the journal are
given below:
Letters: The publication fee for each published
Letter article submitted is US $300.
Review Articles: The publication fee for
each published review article is US $450.
Mini-review Articles: The publication fee
for each published mini-review article is US $300.
Research Articles: The publication fee
for each published Research article is US $400.
Book Reviews: The open access fee for a
published book review is US $225.
Once the paper is accepted for publication, the author will
receive by email an electronic invoice. The fee form is
also available on the Web site at www.benthamscience.com/open/feeform
MEMBERSHIP: Join as a member of Bentham Open today
to obtain great discounts on your article publication fees!
For details click
here.
REPRINTS: High quality printed reprints of published
articles are available for purchase, if ordered, with a
minimum number of 100 reprints.
1 The submission process is compatible
with version 3.0 or later of Internet Explorer and Netscape
Navigator, and with most other modern Web browsers. It can
be used from PC, Mac, or Unix platforms.
2 In this connection, we
recommend the use of Microsoft Word version 2000 and above.
