The Open Colloid Science Journal is
an Open Access online journal, which publishes Research articles,
Reviews and Letters in the field of colloid and interface
science, aiming at providing the most complete and reliable
source of information on current developments in the field.
Manuscripts may be submitted directly to tocollsj@benthamopen.org.
Each peer-reviewed article that is published in a Bentham
OPEN Journal is universally and freely accessible via
the Internet in an easily readable and printable PDF format.
Online Manuscript Submission: An online submission
and tracking service via Internet facilitates a speedy
and cost-effective submission of manuscripts.1
The full manuscript has to be submitted online via
Bentham's Content Management System (CMS) at http://www.bentham-editorial.org
/ View
Submission Instructions.
Alternatively, you may also submit your full manuscript by
e-mail to tocollsj@benthamopen.org.
Manuscripts must be submitted by one of the authors of the
manuscript, and should not be submitted by anyone on their
behalf. The principal/corresponding author will be required
to submit a Covering Letter along with the manuscript, on
behalf of all the co-authors (if any). The author(s) will
confirm that the manuscript (or any part of it) has not been
published previously or is not under consideration for publication
elsewhere. Furthermore, any illustration, structure or table
that has been published elsewhere must be reported, and copyright
permission for reproduction must be obtained.
For all online submissions, please provide soft copies of
all the materials (main text in MS Word or Tex/LaTeX), figures
/ illustrations in TIFF, PDF or JPEG, and chemical structures
drawn in ChemDraw (CDX) / ISISDraw (TGF) as separate files,
while a PDF version of the entire manuscript must also be
included, embedded with all the figures / illustrations /
tables / chemical structures etc. It is advisable that the
document files related to a manuscript submission should always
have the name of the corresponding author as part of the file
name, i.e., "Cilli MS text.doc" , "Cilli MS Figure
1", etc.
It is imperative that before submission, authors should carefully
proofread the files for special characters, mathematical symbols,
Greek letters, equations, tables and images, to ensure that
they appear in proper format.
A successful electronic submission of a manuscript will be
followed by a system-generated acknowledgement to the principal/corresponding
author within 72 hours of the dispatch of
the manuscript. Any questions with regards to the preparation
of and submission of your manuscript to the journal should
be addressed to tocollsj@benthamopen.org
and copied to managingeditor@benthamopen.org
NOTE: Any queries therein
should be addressed to oa@benthamscience.org
and copied to Jalil@benthamscience.org
Manuscript Preparation: The
manuscript should be written in English in a clear, direct
and active style. All pages must be numbered sequentially,
facilitating in the reviewing and editing of the manuscript.
For further convenience, the customer support team available
at Bentham Publishing Services (www.benthampublishingservices.com)
can provide assistance to authors for the preparation of manuscripts.
Manuscript Length:
Research Articles: The total number
of words for a published research article is from 4000 to
8000 words.
Review Articles: The total number of words
for a published comprehensive review article article is from
8000 to 40000 words, and for mini-review articles from 3000
to 6000 words.
Letter Articles: The total number of words
for a published letter/short communication article is from
3000 to 6000 words.
There is no restriction on the number of figures, tables or
additional files e.g. video clips, animation and datasets,
that can be included with each article online. Authors should
include all relevant supporting data with each article.
Manuscripts Published: The Journal
accepts letters/short communications, original research articles,
and mini- and full-length review articles written in English.
Supplements, proceedings of conferences and book reviews may
also be considered for publication.
Supplements/Single Topic Issues: The journal also considers Supplements /Thematic issues for publication. The Guest Edited Thematic Issues are published free of charge.
A Supplements/Single topic will be a collection of articles (minimum of 6, maximum of 20 articles) based on a contemporary theme or topic of great importance to the field. Mini-supplements consisting of between 3 to 5 articles are also welcome. A Supplement can consist of either all review articles or a mixture of review and research articles. The Guest Editors' main editorial task is to invite the contributors to the Supplement and to manage the peer review of submitted manuscripts. A short summary or proposal for editing a supplement should be submitted to the Editor-in-Chief at e-mail to tocollsj@benthamopen.org
with a copy to specialissue@benthamopen.org
Conference Proceedings: For proposals to publish conference proceedings in this journal, please contact us at email: proceedings@benthamscience.org
Open Access Book Reviews: This
journal publishes open access reviews on recently published
books (both print and electronic) relevant to the journal.
Publishers and authors of books are invited to contact our
book reviews editor at tocollsj@benthamopen.org
with book review requests. All submitted books will be reviewed
by an independent expert in the field.
MANUSCRIPT SECTIONS FOR PAPERS: Manuscripts
for research articles and letters submitted to the respective
journals should be divided into the following sections; however,
there can be an extension in the number of sections in review
articles in accordance with the requirements of the topic.
Covering letter
Title
Title page
Keywords
Abstract
Text organization
List of abbreviations (if any)
Conflict of interest (if any)
Acknowledgements (if any)
References
Appendices
Figures/illustrations (if any)
Chemical structures (if any)
Tables and captions (if any)
Supportive/supplementary material (if any)
COVERING LETTER: It is a mandatory requirement
that a signed covering letter also be submitted
along with the manuscript by the author to whom correspondence
is to be addressed, delineating the scope of the submitted
article declaring the potential competing interests, acknowledging
contributions from authors and funding agencies, and certifying
that the paper is prepared according to the 'Instructions
for Authors'. All inconsistencies in the
text and in the reference section, and any typographical errors
must be carefully checked and corrected before the submission
of the manuscript. The article contains
no such material or information that may be unlawful,
defamatory, fabricated, plagiarized, or which would,
if published, in any way whatsoever, violate the terms and
conditions as laid down in the agreement. The authors
acknowledge that the publishers have the legal right
to take appropriate action against the authors for any such
violation of the terms and conditions as laid down in the
agreement. Download
the Covering letter
TITLE: The title should be precise and brief
and must not be more than 120 characters. Authors should avoid
the use of non-standard abbreviations. The title must be written
in title case except for articles, conjunctions and prepositions.
Authors should also provide a short ‘running title’.
TITLE PAGE: Title page should include paper
title, author(s) full name and affiliation, corresponding
author(s) names complete affiliation/address, along with phone,
fax and email.
KEYWORDS: Please provide 6-8 keywords in alphabetical
order.
ABSTRACT: The abstract should not exceed
250 words for review and research papers and should be limited
to only 150 words for letters, summarizing the essential features
of the article. The use of abbreviations should be reduced
to a minimum and the references should not be cited in the
abstract.
TEXT ORGANIZATION: The main text should begin on
a separate page and should be divided into separate sections.
For Research articles, the preparation of the main text must
be structured into separate sections as Introduction,
Materials and Methodology, Results, Discussion and Conclusion.
For Review and Letter articles, the manuscript should be divided
into title page, abstract and the main text. The text may
be subdivided further according to the areas to be discussed,
which should be followed by the Acknowledgement (if any) and
Reference sections. The review article should mention any
previous important reviews in the field and contain a comprehensive
discussion starting with the general background of the field.
It should then go on to discuss the salient features of recent
developments. The authors should avoid presenting material
which has already been published in a previous review. Crystallographic
studies may also be included. The authors are advised to present
and discuss their observations in brief. The manuscript style
must be uniform throughout the text and 10 pt Times New Roman
fonts should be used. The full term for an abbreviation should
precede its first appearance in the text unless it is a standard
unit of measurement. The reference numbers should be given
in square brackets in the text. Italics should be used for
Binomial names of organisms (Genus and Species), for emphasis
and for unfamiliar words or phrases. Non-assimilated words
from Latin or other languages should also be italicized e.g.
per se, et al. etc.
Greek Symbols and Special Characters: Greek
symbols and special characters often undergo formatting changes
and get corrupted or lost during preparation of manuscript
for publication. To ensure that all special characters used
are embedded in the text, these special characters should
be inserted as a symbol but should not be a result of any
format styling (Symbol font face) otherwise they
will be lost during conversion to PDF/XML2.
Authors are encouraged to consult reporting guidelines. These
guidelines provide a set of recommendations comprising a list
of items relevant to their specific research design. Chemical
equations, chemical names, mathematical usage, unit of measurements,
chemical and physical quantity & units must conform to
SI and Chemical Abstracts or IUPAC.
All kinds of measurements should be reported only in International
System of Units (SI).
Depositing of Data: Data of organic and metal-organic
structures should be sent by e-mail to the Cambridge Crystallographic
Data Centre (CCDC). The preferred mode of deposition is a
standard ASCII file. Wherever possible the CIF format should
be used but other formats will be accepted as well. Data can
also be deposited as a hard-copy. A checklist of data items
for deposition can be obtained from the CCDC Home Page on
the World Wide Web (http://www.ccdc.cam.ac.uk)
or by e-mail (fileserv@ccdc.cam.ac.uk)
with the one-line message "send me checklist". Address
for e-mail deposition: deposit@ccdc.cam.ac.uk The hard-copy
deposition should be addressed to: CCDC, 12 Union Road, Cambridge
CB2 1EZ, UK The crystallographic data associated with inorganic
structures should be deposited with the Fachinformationszentrum
Karlsruhe. FIZ accepts the data deposited in electronic form
only (preferably in CIF format). Deposition guidelines and
example files can be obtained on the http://www.fiz-karlsruhe.de
other products deposition of crystal structure data Address
for e-mail deposition is: crysdata@fiz-karlsruhe.de
Both databases provide the author with a deposition number
which will be published in a footnote of the contribution
in the journal.
LIST OF ABBREVIATIONS: If abbreviations are used
in the text either they should be defined in the text where
first used, or a list of abbreviations can be provided.
CONFLICT OF INTEREST: Financial contributions
to the work being reported should be clearly acknowledged,
as should any potential conflict of interest.
ACKNOWLEDGEMENTS: Please acknowledge anyone (individual/company/institution)
who has contributed to the study by making substantial contributions
to conception, design, acquisition of data, or analysis and
interpretation of data, or who was involved in drafting the
manuscript or revising it critically for important intellectual
content. Please list the source(s) of funding for the study,
for each author, and for the manuscript preparation in the
acknowledgements section.
REFERENCES: References must be listed in the ACS Style only. All references should be numbered sequentially [in square brackets] in the text and listed in the same numerical order in the reference section. The reference numbers must be finalized and the bibliography must be fully formatted before submission.
See below few examples of references listed in the ACS Style:
Journal Reference:
[1] Gallant, M.; Dufresne, C.; Gareau, Y.; Guay, D.; Leblanc, Y.; Prasit, P.; Rochette, C.; Sawyer, N.; Slipertz, D.M.; Tremblay, N.; Metters, K.M.; Labelle, M. New glass of potent rigands for the human peripheral cannabinoid receptor. Bioorg. Med. Chem. Lett., 1996, 6, 2263-2268.
[2] Bard, M.; Woods, R.A.; Bartón, D.H.; Corrie, J.E.; Widdowson, D.A. Sterol mutants of Saccharomyces cerevisiae: chromatographic analyses. Lipids, 1977, 12(8), 645-654.
Book Reference:
[3] Crabtree, R.H. The Organometallic Chemistry of the Transition Metals, 3rd ed.; Wiley & Sons: New York, 2001.
Book Chapter Reference:
[4] Wheeler, D.M.S.; Wheeler, M.M. In Studies in Natural Products Chemistry; Atta-ur-Rahman, Ed.; Elsevier Science B. V: Amsterdam, 1994; Vol. 14, pp. 3-46.
Conference Proceedings:
[5] Jakeman, D.L.; Withers, S.G.E. In Carbohydrate Bioengineering: Interdisciplinary Approaches. Proceedings of the 4th Carbohydrate Bioengineering Meeting, Stockholm, Sweden, June 10-13, 2001; Teeri, T.T.; Svensson, B.; Gilbert, H.J.; Feizi, T., Eds.; Royal Society of Chemistry: Cambridge, UK, 2002; pp. 3-8.
URL(Web Page):
[6] National Library of Medicine. Specialized Information Services: Toxicology and Environmental Health. http://sis.nlm.nih.gov/Tox/ToxMain.html (accessed May 23, 2004).
Patent:
[7] Reynald, R. U.S. 20026,441,034. 2002. August 27.
Thesis:
[8] Kirby, C.W. Thesis, University of Waterloo, 2000.
E-citations:
[9] Citations for articles/material published exclusively online or in open access (free-to-view), must contain the exact Web addresses (URLs) at the end of the reference(s), except those posted on an author’s Web site unless editorially essential, e.g. ‘Reference: Available from: URL’.
Some important points to remember:
*All references must be complete and accurate.
*All authors must be cited and there should be no use of
the phrase et al.
*Online citations should include the date of access.
*Journal abbreviations should follow the Index Medicus/MEDLINE.
*Take special care of the punctuation convention as described
in the above-mentioned examples.
*Avoid using superscript in the in-text citations and reference
section.
*Abstracts, unpublished data and personal communications
(which can only be included if prior permission has been obtained)
should not be given in the reference section but they may
be mentioned in the text and details provided as footnotes.
*The authors are encouraged to use a recent version of EndNote
(version 5 and above) or Reference Manager (version 10) when
formatting their reference list, as this allows references
to be automatically extracted.
APPENDICES: In case there is a need to present
lengthy, but essential methodological details, use appendices,
which can be a part of the article. An appendix must not exceed
three pages (Times New Roman, 12 point fonts, 900 max. words
per page).The information should be provided in a condensed
form, ruling out the need of full sentences. A single appendix
should be titled APPENDIX, while more than one can be titled
APPENDIX A, APPENDIX B, and so on.
FIGURES/ILLUSTRATIONS: The authors should provide
the illustrations as separate files, as well as embedded in
the text file, numbered consecutively in the order of their
appearance. Each figure should include a single illustration.
No charges will be levied on the use of color figures except
in the reprints. Each figure should be closely cropped to
minimize the amount of white space surrounding the illustration.
If a figure consists of separate parts, it is important that
a single composite illustration file be submitted, containing
all parts of the figure.
Photographs should be provided with a scale bar if appropriate,
as well as high-resolution component files.
Scaling/Resolution:
For Line Art image type, which is generally an image
based on lines and text and does not contain tonal or shaded
areas, the preferred file format is TIFF or EPS, with colour
mode being Monochrome 1-bit or RGB, in a resolution of 900-1200
dpi.
For Halftone image type, which is generally a continuous tone photograph and contains no text, the preferred file format is TIFF, with colour mode being or RGB or Grayscale, with a minimum resolution of 300 dpi.
For Combination image type, which is generally an image containing
halftone in addition to text or line art elements, the preferred
file format is TIFF, with colour mode being or RGB or Grayscale,
in a resolution of 500-900 dpi.
Formats:
For illustrations, the following file formats are
acceptable:
• Illustrator
• EPS (preferred format for diagrams)
• PDF (also especially suitable for
diagrams)
• PNG (preferred format for photos
or images)
• Microsoft Word (version 5 and above;
figures must be a single page)
• PowerPoint (figures must be a single
page)
• TIFF
• JPEG (conversion should be done using
the original file)
• BMP
• CDX (ChemDraw)
• TGF (ISISDraw)
Bentham OPEN does not process figures submitted in
GIF format.
If the large size of TIFF or EPS figures acts as an obstacle to online submission, authors may find that conversion to JPEG format before submission results in significantly reduced file size and upload time, while retaining acceptable quality. JPEG is a 'lossy' format. However, in order to maintain acceptable image quality, it is recommended that JPEG files are saved at High or Maximum quality.
Files should not be compressed with tools such as Zipit or
Stuffit prior to submission as these tools will in any case
produce negligible file-size savings for JPEGs and TIFFs,
which are already compressed.
Please do not:
1.Supply embedded graphics in your word processor (spreadsheet,
presentation) document;
2.Supply files that are optimized for screen use (like GIF,
BMP, PICT, WPG); the resolution is too low;
3.Supply files that are too low in resolution;
4.Submit graphics that are disproportionately large for the
content.
Image Conversion Tools
There are many software packages, many of them freeware or
shareware, capable of converting to and from different graphics
formats, including PNG.
Good general tools for image conversion include GraphicConverter
on the Macintosh, PaintShop Pro, for Windows, and ImageMagick,
which is available on Macintosh, Windows and UNIX platforms.
Note that bitmap images (e.g. screenshots) should not be converted
to EPS, since this will result in a much larger file size
than the equivalent JPEG, TIFF, PNG or BMP, with no increase
in quality. EPS should only be used for images produced by
vector-drawing applications such as Adobe Illustrator or CorelDraw.
Most vector-drawing applications can be saved in, or exported
as, EPS format. In case the images have been originally prepared
in an Office application, such as Word or PowerPoint, then
the original Office files should be directly uploaded to the
site, instead of being converted to JPEG or another format
that may be of low quality.
Chemical Structures: Chemical structures
MUST be prepared according to the guidelines below.
Structures should be prepared in ChemDraw and provided as
separate file, submitted both on disk and in printed formats.
Structure Drawing Preferences:
[As according to the ACS style sheet]
Drawing Settings:
Chain angle 120°
Bond spacing 18% of width
Fixed length 14.4 pt (0.500cm,
0.2in)
Bold width 2.0
pt (0.071cm, 0.0278in)
Line width 0.6
pt (0.021cm, 0.0084in)
Margin width 1.6 pt (0.096cm)
Hash spacing 2.5 pt (0.088cm, 0.0347in)
Text settings:
Font Times
New Roman
Size 8
pt
Under the Preference Choose:
Units points
Tolerances 3
pixels
Under Page Setup Use:
Paper US
letter
Scale 100%
TABLES:
*Data Tables should be submitted in Microsoft Word table format.
*Each table should include a title/caption being explanatory
in itself with respect to the details discussed in the table.
Detailed legends may then follow.
*Table number in bold font i.e. Table 1,
should follow a title. The title should be in small case with
the first letter in caps. A full stop should be placed at
the end of the title.
*Tables should be embedded in the text exactly according to
their appropriate placement in the submitted manuscript.
*Columns and rows of data should be made visibly distinct
by ensuring that the borders of each cell are displayed as
black lines.
*Tables should be numbered in Arabic numerals sequentially
in order of their citation in the body of the text.
*If a reference is cited in both the table and text, please
insert a lettered footnote in the table to refer to the numbered
reference in the text.
*Tabular data provided as additional files can be submitted
as an Excel spreadsheet.
SUPPORTIVE/SUPPLEMENTARY MATERIAL:
We do encourage to append supportive material, for example
a PowerPoint file containing a talk about the study, a PowerPoint
file containing additional screenshots, a Word, RTF, or PDF
document showing the original instrument(s) used, a video,
or the original data (SAS/SPSS files, Excel files, Access
Db files etc.) provided it is inevitable or endorsed by the
journal's Editor.
Supportive/Supplementary material intended for publication
must be numbered and referred to in the manuscript but should
not be a part of the submitted paper. In-text citations as
well as a section with the heading "Supportive/Supplementary
Material" before the "References" section should
be provided. Here, list all Supportive/Supplementary Material
and include a brief caption line for each file describing
its contents.
Any additional files will be linked into the final published
article in the form supplied by the author, but will not be
displayed within the paper. They will be made available in
exactly the same form as originally provided only on our Web
site. Please also make sure that each additional file is a
single table, figure or movie (please do not upload linked
worksheets or PDF files larger than one sheet). Supportive/
Supplementary material must be provided in a single zipped
file not larger than 4 MB.
Authors must clearly indicate if these files are not for
publication but meant for the reviewers'/editors' perusal
only.
PERMISSION FOR REPRODUCTION:
Published/reproduced material should not be included
unless you have obtained written permission from the copyright
holder, which should be forwarded to the Editorial Office
in case of acceptance of your article for publication.
For obtaining permission for reproducing any material published
in an article by Bentham Science Publishers, please fill in
the request FORM
and send to tocollsj@benthamopen.org
for consideration.
AUTHORS AND INSTITUTIONAL AFFILIATIONS: The author
will be required to provide their full names, the institutional
affiliations and the location, with an asterisk in front of
the name of the principal/corresponding author. The corresponding
author(s) should be designated and their complete address,
business telephone and fax numbers and e-mail address must
be stated to receive correspondence and galley proofs.
REVIEWING AND PROMPTNESS OF PUBLICATION: All manuscripts
submitted for publication will be immediately subjected to
peer-reviewing, usually in consultation with the members of
the Editorial Advisory Board and a number of external referees.
Authors may, however, provide in their Covering Letter the
contact details (including e-mail addresses) of four potential
peer reviewers for their paper. Any peer reviewers suggested
should not have recently published with any of the authors
of the submitted manuscript and should not be members of the
same research institution.
All peer-reviewing will be conducted via the Internet
to facilitate rapid reviewing of the submitted manuscripts.
Every possible effort will be made to assess the manuscripts
quickly with the decision being conveyed to the authors in
due course. Papers which are delayed by authors in revision
for more than 30 days will have to be re-submitted as a new
submission.
LANGUAGE AND EDITING: Manuscripts submitted
containing many English typographical errors will not be published.
Manuscripts which are accepted for publication on condition
that the written English submitted is corrected, will be sent
a quote by Eureka
Science, a professional language editing company. Authors
from non-English language countries who have poor English
language written skills, are advised to contact the language
editing company prior to submitting their manuscript to the
journal. Please contact Eureka
Science for a language editing quote at e-mail: info@eureka-science.com stating the total number of words of the article to be edited.
언어 및 편집: 영문 오타가 많은 원고는 출판되지 않을 것입니다. 영문 오타를 없애겠다는 조건으로 받은 원고는 영어 편집 전문회사인 유럽 공동 기술개발 기구로부터 가격 견적서가 보내 질 것입니다. 영어 작문에 어려움이 있는 비영어권 국가의 저자들은 원고를 학술지에 제출하기 전에 영어 편집회사와 접촉할 것을 권합니다. 영어 편집 견적서를 받기 위해서 교정될 원고의 단어수를 적은 메일을 유럽 공동 기술개발 기구 메일인 info@eureka-science.com로 보내시기 바랍니다.
语言和编辑: 含有很多英文印刷错误的提交稿将不予发表。接受发表的稿件其英文写作应是正确的；专业的语言编辑公司（尤里卡科学），可对稿件的英文润色提供报价。建议非英语国家、且英文写作欠佳的作者在投稿前先与语言编辑公司联系。请与尤里卡科学联系 info@eureka-science.com
EDITION ET LANGUE: Les manuscrits soumis avec plusieurs erreurs typographiques en Anglais ne seront pas publiés en l’état. Les manuscrits sont acceptés pour publication à la condition que l'anglais utilisé soit corrigé après la soumission et seront envoyés pour examen à Eureka
Science, une société d'édition de langue professionnelle. Les auteurs en provenance de pays où la langue est différente de l'anglais et qui ont de médiocres compétences en anglais écrit, sont priés de contacter la société d'édition de langue avant de soumettre leur manuscrit à la revue. Merci de contacter Eureka Science à info@eureka-science.com pour un devis en indiquant le nombre total de mot de l’article à éditer.
PROOF CORRECTIONS: Authors are required to proofread
the PDF versions of their manuscripts before submission. To
avoid delays in publication, proofs should be checked immediately
for typographical errors and returned within 48 hours.
Major changes are not acceptable at the proof stage. If unable
to send corrections within 48 hours due to
some reason, the author(s) must at least send an acknowledgement
on receiving the galley proofs or the article will be published
exactly as received and the publishers will not be responsible
for any error occurring in the manuscript in this regard.
The corresponding author will be solely responsible for ensuring
that the revised version of the manuscript incorporating all
the submitted corrections receives the approval of all the
authors of the manuscript.
COPYRIGHT: Authors who publish in Bentham
OPEN Journals retain copyright to their work. Submission
of a manuscript to the respective journals implies that all
authors have read and agreed to the content of the Covering
Letter or the Terms and Conditions. It is a condition
of publication that manuscripts submitted to this journal
have not been published and will not be simultaneously submitted
or published elsewhere. Plagiarism is strictly forbidden,
and by submitting the article for publication the authors
agree that the publishers have the legal right to take appropriate
action against the authors, if plagiarism or fabricated information
is discovered. Once submitted to the journal, the author will
not withdraw their manuscript at any stage prior to publication.
Articles are licensed under the terms of the Creative Commons
Attribution non-commercial License (http://creativecommons.org/licenses/by-nc/3.0/)
which permits unrestricted, non-commercial use, distribution
and reproduction in any medium, providing that the work is
properly cited.
PLAGIARISM PREVENTION: Bentham Science Publisher
uses the iThenticate software to detect instances of overlapping
and similar text in submitted manuscripts. iThenticate software
checks content uploaded by a journal editorial office against
a database of periodicals, the Internet, and a comprehensive
article database. It generates a similarity report, including
the percentage overlap between the uploaded article and published
material. Any instances of content overlap are treated according
to a journal's peer review integrity statement and the policies
recommended by the editorial Committee. You are assured that
the publisher, where you are submitting your manuscript, is
committed to actively combating plagiarism and publishing
original research.
PUBLICATION FEES: The publication fee for each published Article / Book Review / Letter is US $250.
Once the paper is accepted for publication, the author will
receive by email an electronic invoice. The fee form is also
available on the Web site at www.benthamscience.com/open/FeeForm/FeeForm.pdf.
MEMBERSHIP: Join as a member of Bentham OPEN
today to obtain great discounts on your article publication
fees! For details click
here.
REPRINTS: High quality printed reprints of published
articles are available for purchase, if ordered, with a minimum
number of 100 reprints.
1 The submission process
is compatible with version 3.0 or later of Internet Explorer
and Netscape Navigator, and with most other modern Web browsers.
It can be used from PC, Mac, or Unix platforms.
2 In this connection, we
recommend the use of Microsoft Word version 2000 and above.
