Current Chemical Genomics,
a peer-reviewed open access journal, publishes Research articles,
Reviews, Mini-reviews, Letters and guest edited single topic
issues on all aspects of research and development that is
focused on integrative approaches at the interface of chemistry,
biology and genomics. It reports on technologies used to identify
and optimize chemical probes that interact with proteins involved
in cellular signaling pathways and proteins identified from
genomic research with unknown function. Coverage also includes
reports on new methods and tools of chemo- informatics for
facilitating research in chemical genomics. Optimized new
chemical probes using advanced chemistry, screening methods
and informatics will be used to explore novel therapeutic
approaches and form the basis of a new generation of medicines.
Manuscripts may be submitted directly to tochgenj@benthamopen.org.
Each peer-reviewed article that is published in a Bentham
OPEN Journal is universally and freely accessible via
the Internet in an easily readable and printable PDF format.
Like many other papers published in the Bentham OPEN
Journals, the peer-reviewed article is universally and freely
accessible via the Internet in an easily readable
and printable PDF format. All published articles will be deposited
immediately upon publication in at least one widely and internationally
recognized open access repository such as PubMedCentral. Moreover,
all articles will be indexed by PubMed therefore providing
the maximum exposure to the articles. We are confident of
the journal’s rapid success.
Online Manuscript Submission:
An online submission and tracking service via
Internet facilitates a speedy and cost-effective submission
of manuscripts.1 The full
manuscript has to be submitted online via
Bentham's Content Management System (CMS) at http://www.bentham-editorial.org/
View
Submission Instructions
Alternatively, you may also submit your full manuscript
by e-mail to tochgenj@benthamopen.org
Manuscripts must be submitted by one of the authors of the
manuscript and should not be submitted by anyone on their
behalf. The principal/corresponding author will be required
to submit a Covering Letter along with the manuscript, on
behalf of all the co-authors (if any). The author(s) will
confirm that the manuscript (or any part of it) has not been
published previously or is not under consideration for publication
elsewhere. Furthermore, any illustration, structure or table
that has been published elsewhere must be reported, and copyright
permission for reproduction must be obtained.
For all online submissions, please provide soft copies of
all the materials (main text in MS Word or Tex/LaTeX), figures
/ illustrations in TIFF, PDF or JPEG, and chemical structures
drawn in ChemDraw (CDX) / ISISDraw (TGF) as separate files,
while a PDF version of the entire manuscript must also be
included, embedded with all the figures / illustrations /
tables / chemical structures etc. It is advisable that the
document files related to a manuscript submission should always
have the name of the corresponding author as part of the file
name, i.e., "Cilli MS text.doc" , "Cilli MS Figure
1", etc.
It is imperative that before submission, authors should carefully
proofread the files for special characters, mathematical symbols,
Greek letters, equations, tables and images, to ensure that
they appear in proper format.
A successful electronic submission of a manuscript will be
followed by a system-generated acknowledgement to the principal/corresponding
author within 72 hours of the dispatch of
the manuscript. Any questions with regards to the preparation
of and submission of your manuscript to the journal should
be addressed to tochgenj@benthamopen.org
and copied to managingeditor@benthamopen.org
NOTE: Any queries therein should be addressed
to oa@benthamscience.org
and copied to Jalil@benthamscience.org
Manuscript Preparation:
The manuscript should be written in English in a clear, direct
and active style. All pages must be numbered sequentially,
facilitating in the reviewing and editing of the manuscript.
For further convenience, the customer support team available
at Bentham Publishing Services (www.benthampublishingservices.com)
can provide assistance to authors for the preparation of manuscripts.
Formats of Manuscripts: The Journal accepts
letter articles, original research articles, and mini- and
full length review articles written in English. The journal
also publishes two special columns including “Meet a
Scientist” and “Technology Note”, both are
peered reviewed.
“Meet a Scientist” column
publishes an invited mini-review/review written by an expert/scientist
with a brief biography and a picture of that expert/scientist.
“Technology Note” publishes
the methods and technologies for target identification/validation,
probe screening/optimization, cell based assays/models, and
chemical genomics research. It should have sections including
a brief Introduction/Background; Principle of Assay/Technology
Design including description and a diagram/figure; Methods
including catalog number and purchase information for the
key reagents/materials as well as a detailed and step by step
description of assay protocol or application of technology;
Results with the testing data or sample performances; Discussion
(can be combined with Results section); and References.
Manuscript Length:
Research Articles: The total number of words
for a published research article is from 4000 to 8000 words.
Review Articles: The total number of words
for a published comprehensive review article article is from
8000 to 40000 words, and for mini-review articles from 3000
to 6000 words.
Letter Articles: The total number of words
for a published letter/short communication article is from
3000 to 6000 words.
There is no restriction on the number of figures, tables or
additional files e.g. video clips, animation and datasets,
that can be included with each article online. Authors should
include all relevant supporting data with each article.
Manuscripts Published: The Journal accepts research
articles, review articles and letter articles, written in
English. Supplements, proceedings of conferences and book
reviews may also be considered for publication.
Supplements/Single Topic Issues: The journal also considers Supplements/Single topic issues for publication. A Supplements/Single topic will be a collection of review articles (minimum of 6, maximum of 20 articles) based on a contemporary theme or topic of great importance to the field. Mini-supplements consisting of between 3 to 5 articles are also welcome. The Guest Editors' main editorial task is to invite the contributors to the Supplement and to manage the peer review of submitted manuscripts. A short summary or proposal for editing a supplement should be submitted to the Editor-in-Chief at e-mail to tochgenj@benthamopen.org
with a copy to specialissue@benthamopen.org
Conference Proceedings: For proposals to publish conference proceedings in this journal, please contact us at email: proceedings@benthamscience.org.
Open Access Book Reviews: This journal publishes
open access reviews on recently published books (both print
and electronic) relevant to the journal. Publishers and authors
of books are invited to contact our book reviews editor at
tochgenj@benthamopen.org
with book review requests. All submitted books will be reviewed
by an independent expert in the field.
MANUSCRIPT SECTIONS FOR PAPERS: Manuscripts
for research articles and letters submitted to the respective
journals should be divided into the following sections; however,
there can be an extension in the number of sections in review
articles in accordance with the requirements of the topic.
Covering letter
Title
Title page
Abstract
Key Words
Text organization
List of abbreviations (if any)
Conflict of interest (if any)
Acknowledgements (if any)
References
Appendices
Figures/ illustrations (if any)
Chemical structures (if any)
Tables (if any)
Supportive/ supplementary material (if any)
COVERING LETTER: It is
a mandatory requirement that a signed covering letter also
be submitted along with the manuscript by the author to whom
correspondence is to be addressed, delineating the scope of
the submitted article declaring the potential competing interests,
acknowledging contributions from authors and funding agencies,
and certifying that the paper is prepared according to the
'Instructions for Authors'. All
inconsistencies in the text and in the reference section,
and any typographical errors must be carefully checked and
corrected before the submission of the manuscript. The article
contains no such material or information that may be unlawful,
defamatory, fabricated, plagiarized, or which would, if published,
in any way whatsoever, violate the terms and conditions as
laid down in the agreement. The authors acknowledge that the
publishers have the legal right to take appropriate action
against the authors for any such violation of the terms and
conditions as laid down in the agreement. Download
the Covering letter
TITLE: The title should be precise and brief
and must not be more than 120 characters. Authors should avoid
the use of non standard abbreviations. The title must be written
in title case except for articles, conjunctions and prepositions.
Authors should also provide a short ‘running title’.
TITLE PAGE: Title page should include paper
title, author(s) full name and affiliation, corresponding
author(s) names complete affiliation/address, along with phone,
fax and email.
ABSTRACT: The abstract should not exceed
250 words for review and research papers and should be limited
to only 150 words for letters, summarizing the essential features
of the article. The use of abbreviations should be reduced
to a minimum and the references should not be cited in the
abstract.
KEYWORDS: Please provide 6-8 keywords in
alphabetical order.
TEXT ORGANIZATION: The main text should begin
on a separate page and should be divided into separate sections.
For Research articles, the preparation of the main text must
be structured into separate sections as Introduction,
Materials and Methodology, Results, Discussion, Conclusion
and Trial Registration. For Review and Letter articles,
the manuscript should be divided into title page, abstract
and the main text. The text may be subdivided further according
to the areas to be discussed, which should be followed by
the Acknowledgement (if any) and Reference sections. The review
article should mention any previous important reviews in the
field and contain a comprehensive discussion starting with
the general background of the field. It should then go on
to discuss the salient features of recent developments. The
authors should avoid presenting material which has already
been published in a previous review.
Trial Registration. If your research article reports
the results of a controlled health care intervention, list
your trial registry, along with the unique identifying number,
e.g Trial registration: Current Controlled
Trials ISRCTN73824458. Note that there should be no space
between the letters and numbers of your trial registration
number. For this purpose, a clinical trial is any study that
prospectively assigns human subjects to intervention or comparison
groups to evaluate the cause-and-effect relationship between
a medical intervention and a health outcome. All clinical
trials, regardless of when they were completed, and secondary
analyses of original clinical trials must be registered before
submission of a manuscript based on the trial. Studies designed
for other purposes, such as to study pharmacokinetics or major
toxicity (e.g., phase 1 trials), are exempt. Trial registry
name, registration identification number, and the URL for
the registry should be included at the end of abstract and
also in the space provided on the online manuscript submission
form. If your research article reports the results of a controlled
health care intervention, list your trial registry, along
with the unique identifying number. Note that there should
be no space between the letters and numbers of your trial
registration number.
Authors will submit the Trial Protocols along
with their manuscript. The
CONSORT (Consolidated Standards of Reporting Trials) Checklist
and Flowchart is also required when submitting
the results of randomized control trials (RCTs).
The authors are advised to present and discuss their observations
in brief. The manuscript style must be uniform throughout
the text and 10 pt Times New Roman fonts should be used. The
full term for an abbreviation should precede its first appearance
in the text unless it is a standard unit of measurement. The
reference numbers should be given in square brackets in the
text. Italics should be used for Binomial names of organisms
(Genus and Species), for emphasis and for unfamiliar words
or phrases. Non-assimilated words from Latin or other languages
should also be italicized e.g. in vivo, in vitro, per
se, et al. etc.
Standard Protocol on Approvals, Registrations, Patient Consents & Animal Protection: All clinical investigations must be conducted according to the Declaration of Helsinki principles. For all manuscripts reporting data from studies involving human participants, formal review and approval by an appropriate institutional review board or ethics committee is required. For research involving animals, the authors should indicate whether the procedures followed were in accordance with the standards set forth in the eighth edition of Guide for the Care and Use of Laboratory Animals (http://grants.nih.gov/grants/olaw/Guide-for-the-care-and-use-of-Laboratory-animals/; published by the National Academy of Sciences, The National Academies Press, Washington, D.C.).
A specific declaration of such approval must be made in the cover letter and in a stand-alone paragraph at the end of the Methods section especially in the case of human studies where inclusion of a statement regarding obtaining the written informed consent from each subject or subject's guardian is a must. The original should be retained by the guarantor or corresponding author. Editors may request to provide the original forms by fax or email.
Greek Symbols and Special Characters: Greek
symbols and special characters often undergo formatting changes
and get corrupted or lost during preparation of manuscript
for publication. To ensure that all special characters used
are embedded in the text, these special characters should
be inserted as a symbol but should not be a result of any
format styling (Symbol font face) otherwise they
will be lost during conversion to PDF/XML2.
Authors are encouraged to consult reporting guidelines.
These guidelines provide a set of recommendations comprising
a list of items relevant to their specific research design.
Chemical equations, chemical names, mathematical usage, unit
of measurements, chemical and physical quantity & units
must conform to SI and Chemical Abstracts or IUPAC.
LIST OF ABBREVIATIONS: If abbreviations are used
in the text either they should be defined in the text where
first used, or a list of abbreviations can be provided.
CONFLICT OF INTEREST: Financial contributions to
the work being reported should be clearly acknowledged, as
should any potential conflict of interest.
ACKNOWLEDGEMENTS: Please acknowledge anyone
(individual/company/institution) who has contributed to the
study by making substantial contributions to conception, design,
acquisition of data, or analysis and interpretation of data,
or who was involved in drafting the manuscript or revising
it critically for important intellectual content. Please list
the source(s) of funding for the study, for each author, and
for the manuscript preparation in the acknowledgements section.
This journal complies with the International Committee of
Medical Journal Editors' Uniform Requirements for Manuscripts
Submitted to Biomedical Journals http://www.icmje.org
and the FDA's Good Reprint Practices for the Distribution
of Medical Journal Articles and Medical or Scientific Reference
Publications on Unapproved New Uses of Approved Drugs and
Approved or Cleared Medical Devices http://www.fda.gov/oc/op/goodreprint.html
REFERENCES: References must be listed in the numerical
system (Vancouver). All references should be numbered sequentially
[in square brackets] in the text and listed in the same numerical
order in the reference section. The reference numbers must
be finalized and the bibliography must be fully formatted
before submission.
See below few examples of references listed in the correct
Vancouver style:
Typical Paper Reference:
[1] Boehm M, Nabel EG. Angiotensin-converting enzyme 2-a
new cardiac regulator. N Engl J Med 2002; 347: 1795-7.
[2] SoRelle R. Long reach of the N-terminal of B-type natriuretic
peptide. Circulation 2002; 106: 9059-63.
Typical Chapter Reference:
[3] Stevenson WG, Friedman PL. In: Hennekens CH, Ed. Clinical
trials in cardiovascular disease. Philadelphia, WB Saunders
Co. 1999; pp. 217-30.
Book Reference:
[4] Carlson BM. Human embryology and developmental biology.
3rd ed. St. Louis: Mosby 2004.
Edited Book:
[5] Brown AM, Stubbs DW, Eds. Medical physiology. New York:
Wiley 1983.
Conference Proceedings:
[6] Anderson JC. Current status of chorion villus
biopsy. In: Tudenhope D, Chenoweth J, Eds. Proceedings of
the 4th Congress of the Australian Perinatal Society; 1986:
Brisbane, Queensland: Australian Perinatal Society 1987;
pp. 190-6.
Journal Article on the Internet:
[7] Harris AH, Ed. Economics and health: 1997:
Proceedings of the 19th Australian Conference of Health
Economists; 1997 Sep 13-14; Sydney, Australia. Kensington,
N.S.W.: School of Health Services Management, University
of New South Wales 1998.
Patent:
[8] Pagedas AC, inventor; Ancel Surgical R&D
Inc., assignee. Flexible endoscopic grasping and cutting
device and positioning tool assembly. United States patent
US 20020103498. 2002 Aug.
E-citations:
[9] Citations for articles/material published exclusively
online or in open access (free-to-view) , must contain the
exact Web addresses (URLs) at the end of the reference(s),
except those posted on an author’s Web site unless editorially
essential, e.g. ‘Reference: Available from: URL’.
Some important points to remember:
*References must be complete and accurate.
*Online citations should include the date of access.
*Journal titles should conform to the present ACM Guide to
Computing Literature/Chemical Abstracts etc. abbreviations.
*If the number of authors exceeds six then et al
will be used after three names (the term “et al
” should be in italics).
*Take special care of the punctuation convention as described
in the above-mentioned examples.
*Avoid using superscript in the in-text citations and reference
section.
*Abstracts, unpublished data and personal communications
(which can only be included if prior permission has been obtained)
should not be given in the reference section but they may
be mentioned in the text and details provided as footnotes.
*The authors are encouraged to use a recent version of EndNote
(version 5 and above) or Reference Manager (version 10) when
formatting their reference list, as this allows references
to be automatically extracted.
APPENDICES: In case there is a need to present
lengthy, but essential methodological details, use appendices,
which can be a part of the article. An appendix must not exceed
three pages (Times New Roman, 12 point fonts, 900 max. words
per page).The information should be provided in a condensed
form, ruling out the need of full sentences. A single appendix
should be titled APPENDIX, while more than one can be titled
APPENDIX A, APPENDIX B, and so on.
FIGURES/ ILLUSTRATIONS: The authors should provide
the illustrations as separate files, as well as embedded in
the text file, numbered consecutively in the order of their
appearance. Each figure should include a single illustration.
No charges will be levied on the use of color figures except
in the reprints. Each figure should be closely cropped to
minimize the amount of white space surrounding the illustration.
If a figure consists of separate parts, it is important that
a single composite illustration file be submitted, containing
all parts of the figure.
Photographs should be provided with a scale bar if appropriate,
as well as high-resolution component files.
Scaling/ Resolution:
For Line Art image type, which is generally an image based
on lines and text and does not contain tonal or shaded areas,
the preferred file format is TIFF or EPS, with colour mode
being Monochrome 1-bit or RGB, in a resolution of 900-1200
dpi.
For Halftone image type, which is generally a continuous tone photograph and contains no text, the preferred file format is TIFF, with colour mode being or RGB or Grayscale, with a minimum resolution of 300 dpi.
For Combination image type, which is generally an image
containing halftone in addition to text or line art elements,
the preferred file format is TIFF, with colour mode being
or RGB or Grayscale, in a resolution of 500-900 dpi.
Formats:
For illustrations, the following file formats are acceptable:
• Illustrator
• EPS (preferred format for diagrams)
• PDF (also especially suitable for
diagrams)
• PNG (preferred format for photos
or images)
• Microsoft Word (version 5 and above;
figures must be a single page)
• PowerPoint (figures must be a single
page)
• TIFF
• JPEG (conversion should be done
using the original file)
• BMP
• CDX (ChemDraw)
• TGF (ISISDraw)
Bentham OPEN does not process figures submitted
in GIF format.
If the large size of TIFF or EPS figures acts as an obstacle
to online submission, authors may find that conversion to
JPEG format before submission results in significantly reduced
file size and upload time, while retaining acceptable quality.
JPEG is a ‘lossy’ format, however in order to maintain acceptable image quality, it is recommended that JPEG files
are saved at High or Maximum quality.
Files should not be compressed with tools such as Zipit or
Stuffit prior to submission as these tools will in any case
produce negligible file-size savings for JPEGs and TIFFs,
which are already compressed.
Please do not:
1. Supply embedded graphics in your word processor (spreadsheet,
presentation) document;
2. Supply files that are optimized for screen use (like GIF,
BMP, PICT, WPG); the resolution is too low;
3. Supply files that are too low in resolution;
4. Submit graphics that are disproportionately large for the
content.
Image Conversion Tools:
There are many software packages, many of
them freeware or shareware, capable of converting to and from
different graphics formats, including PNG.
Good general tools for image conversion include GraphicConverter
on the Macintosh, PaintShop Pro, for Windows, and ImageMagick,
which is available on Macintosh, Windows and UNIX platforms.
Note that bitmap images (e.g. screenshots) should not be converted
to EPS, since this will result in a much larger file size
than the equivalent JPEG, TIFF, PNG or BMP, with no increase
in quality. EPS should only be used for images produced by
vector-drawing applications such as Adobe Illustrator or CorelDraw.
Most vector-drawing applications can be saved in, or exported
as, EPS format. In case the images have been originally prepared
in an Office application, such as Word or PowerPoint, then
the original Office files should be directly uploaded to the
site, instead of being converted to JPEG or another format
that may be of low quality.
Chemical Structures: Chemical structures
must be prepared according to the guidelines below.
Structures should be prepared in ChemDraw and provided as
separate file, submitted both on disk and in printed formats.
Structure Drawing Preferences:
[As according to the ACS style sheet]
Drawing Settings:
Chain angle 120°
Bond spacing 18% of width
Fixed length 14.4 pt (0.500cm,
0.2in)
Bold width 2.0
pt (0.071cm, 0.0278in)
Line width 0.6
pt (0.021cm, 0.0084in)
Margin width 1.6 pt (0.096cm)
Hash spacing 2.5 pt (0.088cm, 0.0347in)
Text settings:
Font Times
New Roman
Size 8
pt
Under the Preference Choose:
Units points
Tolerances 3
pixels
Under Page Setup Use:
Paper US
letter
Scale
100%
TABLES:
*Data tables should be submitted in Microsoft Word table format.
*Each table should include a title/caption being explanatory
in itself with respect to the details discussed in the table.
Detailed legends may then follow.
*Table number in bold font i.e. Table 1,
should follow a title. The title should be in small case with
the first letter in caps. A full stop should be placed at
the end of the title.
*Tables should be embedded in the text exactly according to
their appropriate placement in the submitted manuscript.
*Columns and rows of data should be made visibly distinct
by ensuring that the borders of each cell are displayed as
black lines.
*Tables should be numbered in Arabic numerals sequentially
in order of their citation in the body of the text.
*If a reference is cited in both the table and text, please
insert a lettered footnote in the table to refer to the numbered
reference in the text.
*Tabular data provided as additional files can be submitted
as an Excel spreadsheet.
SUPPORTIVE/ SUPPLEMENTARY MATERIAL:
We do encourage to append supportive material, for example
a PowerPoint file containing a talk about the study, a PowerPoint
file containing additional screenshots, a Word, RTF, or PDF
document showing the original instrument(s) used, a video,
or the original data (SAS/SPSS files, Excel files, Access
Db files etc.) provided it is inevitable or endorsed by the
journal's Editor.
Supportive/Supplementary material intended for publication
must be numbered and referred to in the manuscript but should
not be a part of the submitted paper. In-text citations as
well as a section with the heading "Supportive/Supplementary
Material" before the "References" section should
be provided. Here, list all Supportive/Supplementary Material
and include a brief caption line for each file describing
its contents.
Any additional files will be linked into the final published
article in the form supplied by the author, but will not be
displayed within the paper. They will be made available in
exactly the same form as originally provided only on our Web
site. Please also make sure that each additional file is a
single table, figure or movie (please do not upload linked
worksheets or PDF files larger than one sheet). Supportive/
Supplementary material must be provided in a single zipped
file not larger than 4 MB.
Authors must clearly indicate if these files are not for publication
but meant for the reviewers'/editors' perusal only.
PERMISSION FOR REPRODUCTION: Published/reproduced
material should not be included unless you have obtained written
permission from the copyright holder, which should be forwarded
to the Editorial Office in case of acceptance of your article
for publication.
For obtaining permission for reproducing any material published
in an article by Bentham Science Publishers, please fill in
the request FORM
and send to tochgenj@benthamopen.org
for consideration.
AUTHORS AND INSTITUTIONAL AFFILIATIONS:
The author will be required to provide their full names, the
institutional affiliations and the location, with an asterisk
in front of the name of the principal/corresponding author.
The corresponding author(s) should be designated and their
complete address, business telephone and fax numbers and e-mail
address must be stated to receive correspondence and galley
proofs.
REVIEWING AND PROMPTNESS OF PUBLICATION:
All manuscripts submitted for publication will be immediately
subjected to peer-reviewing, usually in consultation with
the members of the Editorial Advisory Board and a number of
external referees. Authors may, however, provide in their
Covering Letter the contact details (including e-mail addresses)
of four potential peer reviewers for their paper. Any peer
reviewers suggested should not have recently published with
any of the authors of the submitted manuscript and should
not be members of the same research institution.
All peer-reviewing will be conducted via the Internet
to facilitate rapid reviewing of the submitted manuscripts.
Every possible effort will be made to assess the manuscripts
quickly with the decision being conveyed to the authors in
due course.
Fast Submission Track:
Current Chemical Genomics may accept these manuscripts
previously rejected by other journals if the authors can provide
the reviewers’ comments and/or editor’s decision
along with a letter of the point-to-point responses to address
these comments. We will accelerate the approval process in
2-4 days for these manuscripts previously declined by Nature,
Science, Nature Medicine, Nature Chemical Biology, Nature
Cell Biology, JBC, Molecular Pharmacology, and some other
journals with high impact factors. This will save the time
and effort of authors for the other important research works.
Please email Dr. Wei Zheng, the Editor-in-Chief of Current
Chemical Genomics (Zhengwe@yahoo.com)
for any inquiry or submission.
LANGUAGE AND EDITING: Manuscripts
submitted containing many English typographical errors will
not be published. Manuscripts which are accepted for publication
on condition that the written English submitted is corrected,
will be sent a quote by Eureka
Science, a professional language editing company. Authors
from non-English language countries who have poor English
language written skills, are advised to contact the language
editing company prior to submitting their manuscript to the
journal. Please contact Eureka
Science for a language editing quote at e-mail: info@eureka-science.com
stating the total number of words of the article to be edited.
PROOF CORRECTIONS: Authors are required
to proofread the PDF versions of their manuscripts before
submission. To avoid delays in publication, proofs should
be checked immediately for typographical errors and returned
within 48 hours. Major changes are not acceptable
at the proof stage. If unable to send corrections within 48
hours due to some reason, the author(s) must at least
send an acknowledgement on receiving the galley proofs or
the article will be published exactly as received and the
publishers will not be responsible for any error occurring
in the manuscript in this regard.
The corresponding author will be solely responsible for ensuring
that the revised version of the manuscript incorporating all
the submitted corrections receives the approval of all the
authors of the manuscript.
COPYRIGHT: Authors who publish in Bentham
OPEN Journals retain copyright to their work. Submission
of a manuscript to the respective journals implies that all
authors have read and agreed to the content of the Covering
Letter or the Terms and Conditions. It is a condition of publication
that manuscripts submitted to this journal have not been published
and will not be simultaneously submitted or published elsewhere.
Plagiarism is strictly forbidden, and by submitting the article
for publication the authors agree that the publishers have
the legal right to take appropriate action against the authors,
if plagiarism or fabricated information is discovered. Once
submitted to the journal, the author will not withdraw their
manuscript at any stage prior to publication.
Articles are licensed under the terms of the Creative Commons
Attribution non-commercial License (http://creativecommons.org/licenses/by-nc/3.0/)
which permits unrestricted, non-commercial use, distribution
and reproduction in any medium, providing that the work is
properly cited.
Plagiarism Prevention: Bentham Science Publisher
uses the iThenticate software to detect instances of overlapping
and similar text in submitted manuscripts. iThenticate software
checks content uploaded by a journal editorial office against
a database of periodicals, the Internet, and a comprehensive
article database. It generates a similarity report, including
the percentage overlap between the uploaded article and published
material. Any instances of content overlap are treated according
to a journal's peer review integrity statement and the policies
recommended by the editorial Committee. You are assured that
the publisher, where you are submitting your manuscript, is
committed to actively combating plagiarism and publishing
original research.
PUBLICATION FEES: The publication fee details
for each article published in the journal are given below:
Letters: The publication fee for each published
Letter article submitted is US $600.
Research Articles: The publication fee for
each published Research article is US $800.
Mini-Review Articles: The publication fee
for each published Mini-Review article is US $600.
Technology Note: The publication fee for
each published Technology Note is US $800.
Review Articles: The publication fee for
each published Review article is US $900.
Book Reviews: The open access fee for a published
book review is US $450.
Once the paper is accepted for publication, the author will
receive by email an electronic invoice. The fee form is also
available on the Web site at www.benthamscience.com/open/feeform
MEMBERSHIP: Join as a member of Bentham OPEN
today to obtain great discounts on your article publication
fees! For details click
here.
REPRINTS: High quality printed reprints
of published articles are available for purchase, if ordered,
with a minimum number of 100 reprints.
1 The submission process
is compatible with version 3.0 or later of Internet Explorer
and Netscape Navigator, and with most other modern Web browsers.
It can be used from PC, Mac, or Unix platforms.
2 In this connection, we
recommend the use of Microsoft Word version 2000 and above.
