Editorial Board ::: Innovations in Corrosion and Materials Science

ISSN: 2352-0957 (Online)
ISSN: 2352-0949 (Print)


Volume 7, 2 Issues, 2017


Download PDF Flyer




Innovations in Corrosion and Materials Science

Formerly: Recent Patents on Corrosion Science

This journal supports open access

Aims & ScopeAbstracted/Indexed in


Submit Abstracts Online Submit Manuscripts Online

Editor-in-Chief:
Oleg L. Figovsky
R&D of International Nanotechnology Research Centre
Migdal HaEmek
Israel


View Full Editorial Board

Subscribe Purchase Articles Order Reprints

Editorial Board

Editor-in-Chief:

Oleg L. Figovsky (Biography
Oleg L. Figovsky

Dr. Figovsky obtained a doctorate (Ph.D.) in Materials Science from the Moscow Civil University. He is the director R&D of INRC Polymate, Israel, Hybrid Coating, Inc. and Nanotech Industries, Inc. (USA); He is Academician of EAS, RAASN and REA; President of Israel Association of Inventors; Chairman of the UNESCO chair "Green Chemistry"; Prof. Figovsky Laureate of the Golden Angel Prize, NASA Nanotech Briefs®’ Nano 50™ Award and the 2015 Presidential Green Chemistry Challenge Award (USA). He has published more than 550 scientific publications, Including 16 books, and is a named inventor of 520 issued U.S and other countries patents. Prof. Figovsky is Editor-in-Chief of Journals: SITA (Israel) and Innovation on Corrosion and Materials Sciences, published by Bentham Science Publishers.

)

R&D of International Nanotechnology Research Centre
Migdal HaEmek
Israel



Co-Editor:

Weitao Zheng (Biography
Weitao Zheng

Dr. Zheng Weitao obtained a doctorate (Ph.D.) in the field of condensed matter physics from the Jilin University. Currently Dr. Zheng is the vice President of Jilin University, a full professor and doctoral supervisor, winner of National Outstanding Youth Fund, he was appointed Cheung Kong Distinguished Professor of Chinese Ministry of Education, and recommended by the Ministry of Education to the central government as a senior expert. Dr. Zheng also works as a member of International Centre for Diffraction Data (ICDD), Vice Chairman of the Chinese Society of Crystallography, board member of the Chinese Materials Research Society. He has published more than 400 scientific publications and these published papers has been cited more than 4000 times. Dr. zheng is currently the co-editor of “Innovations in Corrosion & Materials Science”, published by Bentham Science Publishers.

)

School of Materials Science & Engineering
Jilin University
China


Associate Editors:

M.G.S. Ferreira
Instituto Superior Tecnico
Lisbon
Portugal

M.I. Ojovan (Biography
M.I. Ojovan

Michael I. Ojovan has been Nuclear Engineer at International Atomic Energy Agency and visiting Professor at Imperial College London. He has been known for the connectivity-percolation theory of glass transition, two-exponential viscosity equation, condensed Rydberg matter, metal matrix and glass-composite materials for nuclear waste immobilisation. He has published 12 monographs including “An Introduction to Nuclear Waste Immobilisation”. Michael is Scientific Secretary of the International Predisposal Network launched by IAEA in 2016, Editorial Board Member of “International Journal of Corrosion”, “Science and Technology of Nuclear Installations”, “Journal of Nuclear Materials”, and Associate Editor of journal “Innovations in Corrosion and Materials Science”.

)

University of Sheffield
Sheffield
UK

J. Uruchurtu-Chavarin (Biography
J. Uruchurtu-Chavarin

Dr. Uruchurtu obtained his PhD from the University of Manchester, England. He is a Professor-Researcher at the Autonomous University of the State of Morelos, Mexico, in the Research Center in Engineering and Applied Sciences. He has published more than 200 scientific publications in various aspects of electrochemical corrosion and protection and is currently advisor to the industrial energy sector.

)

Universidad Autonoma Del Estado De Morelos
Morelos
Mexico


Regional Editors:

S. Baragetti (Biography
S. Baragetti

Sergio Baragetti is Full Professor of Machine Design and Computational Mechanics at the Università degli Studi di Bergamo - Italy. He graduated in Mechanical Engineering in 1994 from Politecnico di Milano. His research activities include numerical and experimental study of the effects induced by surface treatments on the fatigue behaviour of mechanical components. He is the Director of GITT - Centre on Innovation Management and Technology Transfer of the University of Bergamo. He is the Director of the Structural mechanics Laboratory of the University of Bergamo. He is the Delegate of the Rector of the University of Bergamo for Technology Transfer and NETVAL – Network for the improvement of University research. He is the author of more than 170 papers: 60 on International Journals, 40 presented during international conferences, 7 Italian books, 5 international books, 5 patents (2 of which international), 1 International Standard, 70 papers on Italian journals and presented during national conferences.

)

University of Bergamo
Bergamo
Italy

J. Shirokoff (Biography
J. Shirokoff

Dr. John Shirokoff is an Associate Professor in the Process Engineering Department, Faculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John’s, NL, Canada. His research is concerned with basic and applied studies in the areas of materials interfacial science and engineering, materials characterization, and corrosion. Research topics involve corrosion in aircraft, erosion corrosion and fluid flow modeling, oil and gas reservoir souring, characterization of asphalt binders, and phase change materials.

)

Memorial University of Newfoundland
Newfoundland
Canada

D. Beilin (Biography
D. Beilin

Dr. Dmitry Beilin obtained doctorate (Ph.D) in Structural engineering from the Moscow State University of Civil Engineering. Currently Dr. D. Beilin is head of the lab of Polymate Ltd.-INRC (Israel) , Chief Scientist Fellow of NanoTech Industries, Inc. (CA, USA), Regional Editor of “Innovation in Corrosion and Material Science” ( published by Bentham Science publishers) and Managing editor of the journal “Scientific Israel- Technological Advantages” . His fields of interest include structural theory, thin-walled space structures, NDT diagnostics in industry and construction, and the strength of polymer composite materials. Dr. D. Beilin has authored 3 books, more than 150 scientific articles and holds 5 patents

)

Physical-Mechanical Lab. of Nanotech Industries Inc.
Daly City
CA
USA

V. Simon
Babes-Bolyai University
Cluj-Napoca
Romania

S. Caporali (Biography
S. Caporali

Dr. Stefano Caporali is presently an adjunct Professor of Material Science at the University of Florence. He graduated in Chemistry (1998), Geology (2010) and received his Ph. D. in Material Science (2006) from the University of Florence (Italy). His research interests cover a wide range of applied and theoretical aspects of electrochemistry and material chemistry, with an emphasis on the electrodeposition of anticorrosion and functional coatings from both aqueous and non-aqueous (ionic liquids) solutions. He pioneered the surface investigation of ionic liquids and their corrosion properties when in contact with steel, brass and light alloys. He was involved in the design and modeling of sustainable and eco-friendly industrial process (nickel and lead free coatings, lead-free noble metal analysis, nanoparticles functionalized ceramics, CTZS photovoltaic materials etc). He was also involved in the study of resource depletion and management , in particular regarding precious metal supply. He is author or coauthor of more than 80 publications in international peer reviewed scientific journals.

)

University of Florence
Florence
Italy

Y.W. Song (Biography
Y.W. Song

Dr. Ying-Wei Song, Prof. in the Institute of Metal Research, Chinese Academy of Sciences (IMR), received her Ph.D degree in Material Sciences from IMR in 2006. Since 2006, her scientific interest main focuses on the corrosion and protection of metal materials, especially in magnesium alloys. To date, Dr. Song has already published over 60 papers with total cited over 1300 times, and holds 8 China invention patents and 1 US invention patents.

)

Chinese Academy of Sciences
Shenyang
China


Section Editors:

(Materials Engineering)
D.M. Bastidas (Biography
D.M. Bastidas

Dr. DAVID M. BASTIDAS, is Researcher at the National Centre for Metallurgical Research, CENIM-CSIC (Madrid, Spain). D.M. Bastidas gained his PhD in Materials Science and Technology in 2004 as well as his BSc in Chemistry at the University of Barcelona (Spain). Dr. D.M. Bastidas is Vice-Chairman of the Corrosion of Steel in Concrete working group of the European Federation of Corrosion (EFC). Dr. D.M. Bastidas has authored more than 75 scientific publications, editor of the book entitled Stainless Steel Reinforcements in Concrete, and over 60 communications to conferences, as well as inventor of two patents.

)

National Centre for Metallurgical Research
Madrid
Spain

(Materials Engineering)
B.V. Salas (Biography
B.V. Salas

B. VALDEZ was the director of the Institute of Engineering during 2006-2013,. He has a B. Sc. in chemical engineering, a M. Sc. and PhD in chemistry, and is a member of the Mexican Academy of Science and the National System of Researchers in Mexico. He was the guest editor of Corrosion Reviews, in which he produced two special issues on corrosion control in geothermal plants and the electronic industry. He is a full professor at the University of Baja California. His activities include corrosion research, consultancy, and control in industrial plants and environments. During the IMRS Congress, in August 2013, Mexico, he received a “Distinguished Service Award” from NACE International and the NACE Central.

)

Universidad Autonoma de Baja California
Mexicali
Mexico

(Materials Engineering)
X. Cao (Biography
X. Cao

Dr. Cao obtained a doctorate (Ph.D.) in Metallurgy and Materials from the University of Birmingham, the United Kingdom. Currently Dr. Cao is also Adjunct Professor in Ryerson University, University of Quebec at Chicoutimi, and École de Technologie Supérieure. He has published more than 135 scientific publications in academic journals and conference proceedings. Dr. Cao is currently the honorary member of Editorial Board for Scientia Research Library, member of Editorial Boards for Manufacturing Science and Technology, International Journal of Metals, and Advances in Materials, and Key Reader for Metallurgical and Materials Transactions A/B/E.

)

National Research Council Canada (NRC) - Aerospace
Montreal, Quebec
Canada

(Materials Engineering)
S.G. Wang (Biography
S.G. Wang

He received Ph. D in materials science from Institute of Metal Research, Chinese Academies of Sciences in 2001, from then on he worked in the institute. His research interests are the preparation technique and properties (mechanics, corrosion, tribology, thermology et al) of nanocrystalline metallic materials, and the relationship between different properties. He put forward the concept of intrinsic parameters associated with metallic materials corrosion. The corrosion properties and mechanism can be understood at atomic scale by these intrinsic parameters rather than by conventional parameters. He proposed ‘Severe Rolling Technique’ for producing bulk nanocrystalline metallic materials, this technique can be industrialized.

)

Shenyang National Laboratory for Material Sciences
Shenyang
China


Editorial Board Members:

O. Akhavan (Biography
O. Akhavan

Omid Akhavan received his PhD in Physics from Sharif University of Technology (SUT) in 2003. He was immediately invited to join the Physics Department of SUT where he is currently the Elite Professor (based on the selection of the National Federation of Scientific Elites). His research interests include physics of nanomaterials, graphene and its bioapplications in stem cell-based tissue engineering, photothermal therapy of cancer, biosensing, and antibacterial nanomaterials. The first national Iranian activity on the fabrication of graphene and one of the first studies on cyto- and geno-toxicity of graphene were guided by him.

)

Sharif University of Technology
Tehran
Iran

N.K. Allam
Georgia Inst. of Technology
Atlanta, GA
USA

R.A. Antunes
Federal University of ABC
Santo Andre
Brazil

A.M. Atta
Egyptian Petroleum Research Insti
Cairo
Egypt

F. Berto (Biography
F. Berto

Prof. Berto obtained a doctorate (Ph.D.) in Mechanics of Materials from the University of Florence Italy. Currently Prof. Berto is Regius Professor in the Department of Industrial and Mechanical Engineering, Norwegian University of Science and Technology. He has published more than 400. He is an expert of fatigue and fracture design and of many other topics related to the field of mechanics of materials.

)

Norwegian University of Science and Technology
Trondheim
Norway

N.B. Chaure (Biography
N.B. Chaure

Dr. Nandu Chaure is currently working as Associate Professor of Physics at Savitribai Phule Pune University, India. He obtained M.Sc. and Ph.D. degree from University of Pune and University of Bhopal in 1993 and 1999, respectively. He has 24 years research and 17 years teaching experience for post graduate courses. He has FIVE GB and ONE international patent and published ~100 research papers in peer reviewed journals. He is the Editorial board member of several scientific journals. He is also the potential reviewer of over 30 international specialized journals. His area of research is electrochemistry, electrochemical synthesis of metal, semiconductor, oxides thin film, nanoparticles, Quantum dots, Nanocomposites for thin film solar cells, DSSC, Plasmonic, hybrid, perovskite solar cells, etc.. He also extensively works on organic field effect transistors, Light emitting diodes, memory devices on flexible and rigid substrates for e-paper and flexible display applications.

)

University of London
Queen Mary
UK

S.M. Chen
National Taipei University of Technology
Taipei
Taiwan

G. David
Insti. Charles Gerhardt
Montpellier
France

J. Fang
Xian Jiaotong University
Xi’an
China

K. Habib (Biography
K. Habib

Dr. Khaled Habib holds a Ph.D in Chemical and Materials Engineering from the Optical Science and Technological Center of University of Iowa, Iowa, USA, 1988. He was a Post-doctoral Fellow at the Chem. Engr. Dept., and Mat. Sci. Dept., of the Technical University of Aachen, Aachen, Germany, 1991-1992. He specializes in “Laser optical interferometry as non-destructive testing (NDT) methods of materials evaluation in corrosive media”. Mr. Habib has in his credit more than 129 articles in international refereed journals in his area of specialization.

)

Materials Science & Photo-Electronics Lab, RE Program/EBR Center
Safat
Kuwait

Y.X. Hu
Shanghai Jiao Tong University
Shanghai
China

A. Jagminas (Biography
A. Jagminas

A. Jagminas received MS degree from Vilnius University in 1974 and Ph.D. (Physical Chemistry) degree in 1979. Recently he is a head of Nanostructures Laboratory at the Centre for Physical Sciences and Technology in Vilnius. His research interests focus on the anodizing of metals, fabrication of nanostructured arrays of semiconducting materials, synthesis of clusters and nanoparticles for nanomedicine and antimicrobial applications. Since 2000 he published 75 manuscripts in the journals with average IF>2.0. Currently, he is a pear or outstanding reviewer of more than 10 international journals and an active member of ISE. Awards – Jim Kape silver medal (metal finishing).

)

Insti. of Chemistry
Vilnius
Lithuania

A.A.P. Khan (Biography
A.A.P. Khan

Dr. Aftab Aslam Parwaz Khan is presently working as an Assistant Professor in the Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah, Kingdom of Saudi Arabia. He has secured 3 books, 5 Chapters and more than 100 research papers published in journals of international repute. His research encompasses all aspects of polymer nanocomposites, synthesis and characterization as well as application in chemical sensing, adsorption studies, drug delivery system for mechanistic and interaction studies using a wide range of spectroscopic techniques and thermodynamic parameters.

)

King Abdulaziz University
Jeddah
Saudi Arabia

C.T. Lin
Northern Illinois University
DeKalb, IL
USA

A. Maitre
Universite Pierre et Marie Curie
Paris
France

T.A. Nguyen (Biography
T.A. Nguyen

Tuan Anh Nguyen received his Ph.D. in Chemistry from the Paris Diderot University (France). He was Visiting Scientist at Seoul National University and University of Wollongong. He then worked as Postdoctoral Research Associate and Research Scientist in the Montana State University. He was appointed as the Head of the Microanalysis Department at Institute for Tropical Technology. His research activities include corrosion and protection of metals/concrete, coatings, conducting polymers, and currently the advanced nanomaterials. Activities include He is the author of more than 60 scientific publications: 25 on international journals, 1 international book, 3 Vietnamese books, 35 papers.

)

Vietnam Academy of Science and Technology
Hanoi
Vietnam

J.M. Oliveira (Biography
J.M. Oliveira

Joaquim Miguel Oliveira BSc, PhD is an Principal Investigator at the Portuguese Government Associate Laboratory ICVS/3B’s-Universityof Minho (UM). Currently, he is a lecturer at the Faculty of Medicine, U. Porto and Dept. of Polymer Eng., UM. Since 2001, he has been involved in the development of biomaterials from natural origin for tissue engineering and regenerative medicine. His research activities have been increasingly focused on nanomedicine, stem cells, orthopedics and 3D in vitro models of disease. As a result of his academic activities he has been awarded several international/national prizes, and he is a member of editorial boards and referee of several scientific journals.

)

University of Minho
Minho
Portugal

X. Pang
CanmetMATERIALS
Hamilton, ON
Canada

M.A. Quraishi (Biography
M.A. Quraishi

Dr. M.A. Quraishi is Ph.D. in chemistry is from Kurukshetra University. He was awarded D.Sc. in the field of corrosion inhibition from Aligarh Muslim University. Dr. Quraishi was a founder head and professor of department of chemistry IIT (BHU) Varanasi and presently serving as Institute Professor in the same Institute. He is working in the field of Corrosion Inhibition of Metals and Alloys and Green Chemistry. He has published >300 research papers, h-index: 47, Citation: 6389. He has received several awards including Life Time Achievement Award International Science Congress Association (ISCA), and NIGIS Excellence Award. Dr. Quraishi is a Fellow Royal Society Chemistry UK and member of Editorial Board of several International Journals of repute.

)

Indian Institute of Technology (BHU)
Varanasi
India

V.S. Raja
Indian Insti. Of Technology
Bombay
India

N. Rajendran
Anna University
Chennai
India

A.C.S. Sabioni
Universidade. Federal de Ouro Preto
Ouro Preto
Brazil

M. Schorr (Biography
M. Schorr

M. SCHORR is a professor (Dr. Honoris Causa) at the Institute of Engineering, Universidad Autonoma de Baja California. He has a B.Sc. in chemistry and, a M. Sc. in materials engineering from the Technion-Israel Institute of Technology, with 50 years of experience in industrial corrosion control. From 1986 to 2004, he was editor of Corrosion Reviews. He has published 360 scientific and technical articles on materials and corrosion in English, Spanish, and Hebrew. He has worked as a corrosion consultant and professor in Israel, the United States, Latin America, Spain, South Africa and Europe. During the IMRS Congress in August 2010, Mexico, he received a “Distinguished Service Award” from NACE International and the NACE Central Mexico Section. He is a member of the National System of Researchers in Mexico. He has been a NACE International member for 23 years.

)

Universidad Autonoma de Baja California
Baja California
Mexico

R.G. Song (Biography
R.G. Song

Dr. Song obtained a doctorate (Ph.D.) in Materials Physics from the Northeastern University, Shenyang, China. Currently Dr. Song is a Professor in the Changzhou University School of Materials Science and Engineering. He has published more than 200 scientific publications on stress corrosion cracking (SCC), hydrogen embrittlement (HE), surface modification of metallic materials and is a named inventor of 12 issued China patents.

)

Zhejiang University of Technology
Hangzhou
China

L.X. Sun
Dalian Insti. of Chemical Physics
Dalian
China

D.I. Vaireanu (Biography
D.I. Vaireanu

Dr. D.I. Vaireanu is an Author and co-author of 15 books and university textbooks, 5 invention patents and well over 150 scientific papers published in refereed journals and conference proceedings, Prof. Dănuţ - Ionel Văireanu received his ChemEng degree (1988), graduating top at national level, from the Polytechnic Institute of Bucharest, his MSc (1992) from the University of Manchester, and his PhD (1995) from the University of Manchester Institute of Science and Technology, UK. His active involvement in the field of electrochemistry, corrosion and electrochemical engineering led to a very early recognition abroad from the American Electrochemical Society (USA).

)

Universitatea Politehnica Din Bucureti
Bucureti
Romania

H. Wang (Biography
H. Wang

Dr. Wang is now an associate professor at State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Hubei, China. His current research mainly focuses on electrochemical energy storage and conversion (Li/Na ion batteries, Li-S batteries, inorganic solid electrolyte), quantum-dot sensitized solar cells, ferroelectric and sensor related materials. He has published over 50 papers on SCI journals with a total citation over 1200 times. He is also a regular referee for several international journals and Editor board member of Elyns Journal of Material Science and Techniques, Chemistry of Compounds Journal, and Current Smart Materials.

)

Wuhan University of Technology
Wuhan
China

B.G. Wendler (Biography
B.G. Wendler

Prof. Bogdan G. Wendler obtained a doctorate (Ph.D.) in Materials Science from the Lodz University of Technology (LUT) in Lodz, Poland. Dr. Wendler also holds the D.Sc. title from the Technical University of Czestochowa, Poland. Currently Dr. Wendler is Full Professor in the Higher Technical School (Major in Mechanical Engineering) in Wloclawek, Poland as well as a Director in LUT of several grants in the domain of Surface Engineering funded by National Research Centre of Poland. He has published more than 170 scientific publications, is named inventor of 10 issued Polish patents and was awarded with numerous Medals and Awards from Juries of numerous International Inventions and Innovations Salons and Fairs.

)

Technical University of Lodz
Lodz
Poland

B. Zhang (Biography
B. Zhang

Dr. Bo Zhang received his B.D. in physics from the Nanchang University, his M.D. in corrosion science and protection from Institute of Metal Research (IMR), Chinese Academy of Sciences (CAS) and his Ph.D. in metallurgy and materials from the University of Birmingham, UK. He is currently an associate Professor in IMR. Dr. Zhang has a total of more than 30 research papers published in Corrosion Science, Electrochimica Acta and Journal of the Electrochemical Society, etc. His research expertise is in the localized corrosion and environment-induced cracking of Al alloys, stainless steels and high strength steels.

)

Chinese Academy of Sciences
Shenyang
China

X. Zhu
General research Insti. of Non-ferrous Metals
Beijing
China

H. Alemu
National University of Lesotho
Rome
Italy

R. Ambat (Biography
R. Ambat

Dr. Rajan Ambat obtained a doctorate (Ph.D.) in Corrosion Science and Engineering from Indian Institute of Science, Bangalore, India. Presently Dr. Ambat is Professor of Corrosion and Surface Engineering at Technical University of Denmark. He has published more than 200 scientific publications and 2 patents. His research interest presently include microstructure, corrosion, and surface engineering of light alloys, climatic reliability of electronics, materials and corrosion issues in oil and gas, functionalized coatings, and corrosion under think electrolyte layers.

)

Technical University of Denmark
Lyngby
Denmark

M. Aparicio (Biography
M. Aparicio

Dr. Mario Aparicio (Ph.D.-Chemistry) is a Researcher in the Ceramic and Glass Institute (Spanish National Research Council, CSIC). He got his Ph.D. in Chemistry at Universidad Autónoma de Madrid (1998). Dr. Aparicio research interests focus on implementation of sol-gel process for the synthesis of inorganic materials (glassy and crystalline) and organic-inorganic hybrid materials as coatings and membranes for various applications. Goals in the medium-term are devoted to Energy and Environmental fields; particularly in Direct Alcohol Fuel Cells, Proton-conducting Ceramic Electrolyzer, and sol-gel active coatings for improved corrosion resistance of magnesium alloys and mild steels. He has published more than 60 scientific publications (h-index: 23), one patent, six book chapters and one book edition.

)

Instituto de Cerámica y Vidrio
Madrid
Spain

S. Bandyopadhyay
University of Calcutta
West Bengal
India

F. K. Butt (Biography
F. K. Butt

Dr. Faheem K. Butt is currently working as AvH Fellow in Technical University Munich, Germany. He is an Assistant Professor in Department of Physics at The University of Lahore, Pakistan.Before this he completed his Postdoctoral Research Fellowship from CSNano, Universiti Teknologi Malaysia.He completed his Ph.D. studies from Beijing Institute of Technology China in Materials Physics and Chemistry. He is listed among top 20 Young Productive Scientist (Physicist) of Pakistan by Pakistan Council of Science and Technology in 2017. His interest is in Optoelectronics devices, Energy storage/conversion in nanomaterials and theoretical studies of materials using various softwares. He has published more than 75 papers as an author/co-author in peer reviewed international SCI journals. He has also provided services as a reviewer and Guest Editor for various International journals.

)

University of Lahore
Lahore
Pakistan

Z. Chen (Biography
Z. Chen

Dr. Chen obtained a doctorate (Ph.D.) in material chemistry from Huazhong University of Science and Technology (HUST), China. Currently he is a professor at HUST, vice chairman of Corrosion and Safety of Oil and Gas Fields and Pipelines Specialized Committee (China), member of corrosion inhibitor committee of Chinese Society for Corrosion and Protection (China), editorial advisory board member of “Madridge Journal of Analytical Sciences and Instrumentation” and “Innovations in Corrosion and Materials Science”. He has published more than 50 research papers in international journals and holds 8 invention patents. He has also edited six book chapters.

)

School of Chemistry and Chemical Engineering
Huazhong University of Science and Technology
Wuhan
China

S.L. Cheng (Biography
S.L. Cheng

Dr. Shao-Liang Cheng is currently a Full Professor in the Department of Chemical and Materials Engineering at National Central University, Taiwan, ROC. Dr. Cheng has authored and co-authored two book chapters, five patents, over 100 peer-reviewed SCI journal papers and over 140 conference papers. Dr. Cheng current research interests mainly focus on template synthesis of low-dimensional nanomaterials and their properties, interfacial reactions in metal thin films/semiconductor systems, metal silicide thin films and nanostructures and metallization for Si and SiGe nanodevices.

)

National Central University
Taoyuan
Taiwan

E.E. Ebenso
North West University
Potchefstroom
South Africa

S. Frangini
ENEA
Rome
Italy

D. Hotza (Biography
D. Hotza

Graduated in Chemical Engineering (1988) and Master's degree in Mechanical Engineering (1991) from the Federal University of Santa Catarina (UFSC); Ph.D. in Materials Engineering (1996) from the Technische Universität Hamburg Harburg (TUHH), Germany. Associate Professor at the Federal University of Santa Catarina, he belongs to the Research Group on Ceramic Materials and Composites (CERMAT). Currently he is the coordinator of the Interdisciplinary Laboratory for the Development of Nanostructures (LINDEN). He has experience in Chemical Technology and Materials Engineering, focusing on ceramics, working mainly on processing, sustainability and nanotechnology.

)

Federal University of Santa Catarina
Florianopolis
Brazil

N. Huang
Southwest Jiaotong University
Chengdu
China

F. Jamali-Sheini (Biography
F. Jamali-Sheini

Farid Jamali-Sheini received his M.Sc. degree at the Islamic Azad University, Science and Research Branch, Tehran, Iran, in 1998. He earned his Ph.D. for research activities in Puna University, India on optical and field emission properties of ZnO nanostructures (doped and undoped) in 2010. He became the head of advanced surface engineering and nanomaterials research center in 2014. He is an associate professor of physics at 2015, all in Islamic Azad University, Ahvaz Branch, Ahvaz, Iran. His research interests include optical, electrical, photovoltaic, photocatalytic, gas sensing and field emission behavior of semiconductor nanostructures.

)

Islamic Azad University
Ahwaz
Iran

F. Kong (Biography
F. Kong

Fantao Kong serves as a Professor at the School of Materials Science and Engineering at Harbin Institute of Technology, China. He received his B. Eng. and M. Eng. degrees in chemical engineering from Harbin Institute of Technology, in 1994 and 2000, respectively. He received his Ph.D. degree in materials science and engineering from Harbin Institute of Technology in 2003. From 2009 to 2010, he worked as a Research Fellow at the University of Waikato, New Zealand. His research interests include precision hot forming of Titanium alloy and TiAl intermetallics, control of solidification microstructure and casting, metal matrix composite, and powder metallurgy. He has published more than 130 technical papers, including over 100 journal publications.

)

Harbin Institute of Technology
Harbin
China

Z.Y. Ma (Biography
Z.Y. Ma

Dr. Ma obtained the doctorate (Ph.D.) in Materials Science and Engineering from the City University of Hong Kong, China. He worked as a postdoctoral fellow in the University of Missouri, USA. Currently Dr. Ma is a professor and group leader in the Institute of Metal Research, Chinese Academy of Sciences. He has published 285 peer-reviewed journal papers, with a total of over 8600 citations based on the Web of Science Core Collection. Dr. Ma is the editorial member of several journals such as Materials Science and Engineering A, Journal of Materials Science and Technology and Science China Materials.

)

Institute of Metal Research
Shenyang
China

M.T. Mathew
Rush University Medical Center
Chicago, IL
USA

I.B. Obot (Biography
I.B. Obot

Dr. Ime Bassey Obot received a Ph.D degree in Physical Chemistry from the prestigious University of Ibadan, Nigeria (Formerly affiliated to the University of London) in 2012. He is a Research Scientist at the Center of Research Excellence in Corrosion at King Fahd University of Petroleum and Minerals (KFUPM), Saudi Arabia. Dr. Obot has about 13 years experience in teaching and research in both the University and Industrial environments. Dr. Obot has authored/co-authored over 160 research articles in international peer reviewed journals of wide readership including critical reviews and book chapters. Since Joining KFUPM, he has won Distinguished A+ in Research consequtively from 2013-2015.

)

King Fahd University of Petroleum and Minerals
Dhahran
Saudi Arabia

W.R. Osório (Biography
W.R. Osório

Professor Wislei R. Osório has worked as an associate Professor at the School of Applied Science into University of Campinas (UNICAMP). He has a MSc. and PhD at UNICAMP in 2000 and 2004’s, respectively. He has also carried out two distinctive Post-Doctoral studies (2004-2006 and 2006-2009). He has experience in the following subjects: corrosion resistance, solidification, mechanical properties, dendrite arm spacing and microstructure. He has published ~ 90 scientific articles and more than 140 papers when conference is considered. He was recently laureate with “Zeferino Vaz” recognition award at University (Dec. 2016) and more than 10 Reviewer Elsevier Recognition at 2016’s, totalizing more than 23 since 2013’s.

)

Universidade Estadual de Campinas
São Paulo
Brazil

R.S. Petrova
New Jersey Institute of Technology
Newark, NJ
USA

M. M. Rahman (Biography
M. M. Rahman

Mohammed Muzibur Rahman received his Ph.D. from the Chonbuk National University, South Korea. After his Ph.D., he worked as postdoctoral fellowship and assistant professor in pioneer CIBST research centers and universities. Presently, he is working as associate professor in Center of Excellence for Advanced Materials Research and Chemistry department at King Abdulaziz University, Saudi Arabia. He published more than 180 research articles and several proceeding in well-known high-impact ISIjournals; attended more than 50 international, three US-patents, and domestic conferences; and published several book chapters. His research work has been largely in the area of Nanotechnology, Sensors, Surface Chemistry, Electrochemistry, Nanomaterials, Self-Assembled monolayers, Carbon nanotubes, Photochemistry, & Chips and devices etc.

)

Center of Excellence for Advanced Materials Research (CEAMR)
King Abdulaziz University
Jeddah
Saudi Arabia

A. Rajasekar (Biography
A. Rajasekar

Dr. A.Rajasekar received his doctoral degree in Microbiology from Bharathidasan University, Tiruchirappalli, India for the research work carried-out at the Central Electrochemical Research Institute (CECRI-CSIR), Karaikudi, Tamilnadu, India. Currently, Dr. A. Rajasekar is working at Assistant Professor & Ramalingaswami Fellow, Department of Biotechnology, Thiruvalluvar University, Tamilnadu, India. He has published more than 45 scientific publications and two book chapters.

Dr. A. Rajasekar has Editorial Board Member (2009) in Recent Patents in Corrosion Science, published by Bentham Science Publishers and Frontier in Environmental Science (2013).

)

National University of National University of Singapore
Singapore City
Singapore

M.V. Reddy
National University of National University of Singapore
Singapore City
Singapore

A. Samide
University of Craiova
Craiova
Romania

S. Serna
Autonomus University of Morelos State
Cuernavaca
México

A. Srivastav (Biography
A. Srivastav

Prof Anupam Srivastav has Doctorate and Masters in Mechanical Engineering (Machine Design) from U.P Technical University and IIT-BHU, India respectively and has over 27 years’ experience in teaching, research and industry in the area of Materials Science, particularly Composite Materials, Biomaterials, as well as Tribology and Corrosion Studies. He has about 21 years’ experience in academic administration at various levels starting from Chairman/Head of Department to Pro-Vice Chancellor. Professor Anupam who is currently working as Professor of Mechanical Engineering and Associate Dean (Academic Affairs) of Middle East College (a University College in association with Coventry University, UK), joined this institution in 2012 as Assistant Dean to be designated as Associate Dean in December 2012 on which position he worked till September 2016. Prof. Srivastav is currently member of Management and College Boards as well as Vice Chair of Academic Board and Chair of Examination Board at Middle East College.

)

Middle East College
Muscat
Oman

J. Toribio
University of Salamanca
Salamanca
Spain

L. Veleva (Biography
L. Veleva

She is majored in Electrochemistry (Eng.) in Sofia, Bulgaria, University of Chemical Technology and Metallurgy. Her PhD was done in Institute of Physical Chemistry (Bulgaria) and after that was working as researcher in the “Institute for Protection of Metals from Corrosion” (Sofia, Bulgaria), as a head of National Laboratory of Corrosion. Since 1994 is Associated Professor at Applied Physics Department, CINVESTAV, Mexico. In 2011 she received ¨Doctor Honoris Causa, in 2012 - Francis La Que, Award ASTM G01, USA and in 2013 – NACE International Distinguished Career Award. She has more than 200 articles in international journals, chapters in international books, book and 4 patents.

)

Center for Investigation and Advanced Study (CINVESTAV-IPN)
Yucatan
Mexico

L. Wang (Biography
L. Wang

Professor Li Wang is a Fellow of the Royal Society of Chemistry, Commissioner of the Committee of the Magnetic Resonance Spectroscopy under Chinese Physical Society and dean of the International College of Zhejiang University. He was also a visiting professor of Yale University and University of Washington, a researcher of Czechic Academy of Science. His research interests mainly focus on the synthesis and application of polymers, preparation and organization of nanomaterials. He has published more than 200 papers in the journals such as Chemical Reviews., Progress in Polymer Science, Angewandte Chemie-International Edition, Macromolecules, Nanotechnology and so on.

)

Zhejiang University
Hangzhou
China

W. Xu
Pacific Northwest National Laboratory
Richland, WA
USA

X. Zhang
University of South Florida
Tampa, FL
USA

A. Alfantazi
University of British Columbia
Vancouver, BC
Canada

C. Andrade
Institute of Construction Science
Madrid
Spain

C. Apostolopoulos (Biography
C. Apostolopoulos

Dr. Apostolopoulos obtained a PhD (1998) in Dept. of Mechanical Engineering and Aeronautics from University of Patras. He holds the Civil Engineering Degree (1978) from the University of Patras. He is now Associate Professor in Laboratory of Technology and Strength of Materials, in Dept. Of Mechanical Engineering and Aeronautics, University of Patras. Author of more than 140 scientific publications in Journals and Conferences Proceedings. Participation in more than 20 European and National Projects. Member in the Editorial Board of 6 Journals and Reviewer of articles in 23 Journals. He is Professor of Undergraduate and Postgraduate programs with scientific fields in Advanced Strength of Materials, Analysis of Metallic Structures and Extreme Loading.

)

University of Patras
Patras
Greece

D.P. Bentz (Biography
D.P. Bentz

Dale P. Bentz is a chemical engineer in the Inorganic Materials Group of the Materials and Structural Systems Division of the Engineering Laboratory at the National Institute of Standards and Technology. He received his B.S. in Chemical Engineering in 1984 from the University of Maryland, College Park. He received his Master's Degree in Computer Science from Hood College in 1999 and a Master's of Arts Degree in Teaching from Mount Saint Mary's University in 2013. His research is focused on the application of computer modeling to relate microstructure to material properties and service life for random porous media, such as cement-based materials.

)

National Institute of Standards and Technology
Gaithersburg, MD
USA

I. Cerny
SVÚM a.s
Praha
Czech Republic

J. Chen (Biography
J. Chen

Dr. Chen obtained his doctorate degree (Ph.D) in Corrosion Science and Protection from Institute of Metal Research, Chinese Academy of Sciences, P.R. China. At present, Dr. Chen works as a Research Scientist in Western University, Canada. The research areas for Dr. Jian Chen cover the chemical/electrochemical corrosion and stress corrosion cracking (SCC) behaviors and mechanisms of metals, presently focusing on magnesium alloys and copper, under thin-layer water film conditions or in bulk solutions to solve various industrial/academic and environmental contamination problems by a combination of experimental and modeling approaches. Dr. Chen has published more than 30 peer-reviewed journal papers.

)

Western University
Ontario
Canada

K.T. Chiang
Southwest Research Insti
San Antonio, TX
USA

K. Edalati (Biography
K. Edalati

Kaveh Edalati obtained a Ph.D. degree in materials physics and chemistry from Kyushu University, Fukuoka, Japan, in 2010. He is currently an assistant professor at the International Institute for Carbon-Neutral Energy Research (I2CNER), Kyushu University. His research interests are Hydrogen Storage and Energy Materials, Nanostructured Metallic Materials, Phase Transformations, Severe Plastic Deformation.

)

Kyushu University
Fukuoka
Japan

V.J. Gelling
North Dakota State University
Dakota, ND
USA

J.H. Hu (Biography
J.H. Hu

Dr. Junhua Hu received his PhD. degrees from the Graduate School of Engineering, Shizuoka University. Upon completion of his PhD. degree he joined the school of materials science and engineering, Zhengzhou University, as an associate professor in 2009. In the year of 2012, he established the "International Joint Research Laboratory for Low-carbon & Environmental Materials of Henan". Then, he became a professor there. His research focused on the surface modification of materials; corrosion of nonferrous alloy, energy storage and bio-materials. He has published more than 60 peer-reviewed papers and has co-edited books and special issues in journals on new technologies for advanced surface and interface analyze.

)

Zhengzhou University
Zhengzhou
China

R.R. Hussain
King Saud University
Riyadh
Saudi Arabia

H. Jung (Biography
H. Jung

Dr. Hundal (Andy) Jung obtained a doctorate (Ph.D.) in Materials Engineering from the University of British Columbia, Vancouver, Canada. Currently Dr. Jung is an Advisory Materials Engineer in AREVA TN. Dr. Jung has more than 20 years professional work experience as a materials research engineer in the fields of nuclear, oil and aircraft industry. His technical expertise is specifically in metal corrosion, metallurgy, and material performance assessment focusing on materials degradation. He has published more than 60 scientific technical publications.

)

Transnuclear Inc.-AREVA
Columbia, MD
USA

G. Li
Louisiana State University
Baton Rouge, LA
USA

L. Magagnin
Polytechnic Insti of Milan
Milan
Italy

G. Nemţoi
”Al.I.Cuza” University of Jassy
Lași
Romania

A.P.N. de Oliveira (Biography
A.P.N. de Oliveira

Dr. Antonio Pedro Novaes de Oliveira obtained a PhD in Materials Engineering (1998) from the University of Modena and Reggio Emilia (UNIMORE), Italy. He is Professor of glass and glass-ceramic materials on Department of Mechanical Engineering for the Materials Engineering under graduate and graduate Materials Science and Engineering Courses at Federal University of Santa Catarina (UFSC). He is also Coordinator of the Laboratory of Glass-Ceramic Materials (VITROCER). He has experience in Materials Engineering in particular on processing and characterization of ceramics, glasses and glass-ceramics. He has published more than 170 scientific papers.

)

Federal University of Santa Catarina
Florianópolis, (SC)
Brazil

S. Ozeki (Biography
S. Ozeki

Dr. Ozeki received a doctorate (Dr. of Sci.) from Nagoya University, Japan. He is Professor of Chemistry, Faculty of Science, Shinshu University from 1997. Currently, he is Dean of the Faculty. His research fields are Physical Chemistry, Colloid Chemistry, and Magneto-Science. He has published more than 100 scientific papers.

)

Shinshu University
Nagano
Japan

P. Piccardo (Biography
P. Piccardo

Professor (AP) of Metallurgy, Dept. of Chemistry and Industrial Chemistry of the University of Genoa where he’s leading the Laboratory of Metallurgy and Materials. His research activities started on 1993 focussing on the interaction among materials and between materials and environment. The relationships between chemistry, manufacturing, history and usage, interactions with other materials of metals have been at the base of his research activities which were discussed in more than 100 publications. Recent activities are in renewable and alternative energy sources (especially on by participating to HT-SOFCs EU projects: http://www.idealcell.eu , http://www.evolve-fcell.eu/). As one of the most recent achievement he actually coordinates the FCH-JU FP7 project Endurance ( http://www.durablepower.eu).

)

University of Genoa
Liguria
Italy

Y.L. Raikher
Institute of Continuous Media Mechanics
Perm
Russia

S. Rajendran (Biography
S. Rajendran

Prof Dr Susai Rajendran has been serving the Student Community for the past 43 years as Professor of Chemistry. He is still continuing his research activities in the field of Corrosion and its control, Green Inhibitors, Concrete Corrosion, Corrosion resistance of metals and alloys in various body fluids, Synthesis and Characterization nano particles, Electro organic synthesis …He has received National Meritorious Award in the field of Corrosion, twice, from NACE, India Section. He has authored 3 Books and 1 Patent. He has published more than 300 papers in reputed Journals and produced 30+ PhD Degree Holders. Previously he has worked at GTN Arts College,Dindigul, Servite College of Education for Women, Thogamalai, RVS School of Engineering and Technology, Dindigul, Indial. Presently he is Serving as Professor of Chemistry and Research Director at St Antony’s College of Arts and Sciences for Women, Dindigul. He feels that his students are his strength and wealth. He is standing on the shoulders of his Students. He is taking Research towards the Down Trodden.

)

Corrosion Research Centre
Dindigul
India

A. Rybak (Biography
A. Rybak

Andrzej Rybak received the M.S. degree in Technical Physics (2001) and the Ph.D. degree in Polymer Science (2006) from the Lodz University of Technology, Poland. He was involved in many projects concerning organic semiconductors and their application in optoelectronic devices in the past.

After postdoctoral positions at INSA Lyon and University Lyon 1 in the field of conductive polymer composites, in 2009 he joined the ABB Corporate Research Center; where his focus is on development of the advanced materials for future electrical products. Currently his main field of interest is polymer composites with enhanced thermal conductivity.

)

ABB Corporate Research Center
Kraków
Poland

I. Sandu (Biography
I. Sandu

Prof. Dr. Ion Sandu is specialist in obtaining and characterization of new materials, technology design and intellectual property, with more than 40 years’ experience in the scientific research field. Since 1996 is professor at Alexandru Ioan Cuza University of Iasi, director of Laboratory of Scientific Investigation, ARHEOINVEST Interdisciplinary Platform, PhD Coordinator in Environmental and Engineering Science, director of 92 National Projects and 6 European Projects, supervisor and official review at EPISCON School of Universita degli Studi di Bologna and supervisor of Postdoc Thesis, Honorary Professor and Doctor Honoris Causa. Also grant evaluator for national and international projects. Prof. Ion SANDU has published 76 books and over 916 scientific publications.

)

University of Iasi
Lasi
Romania

S.A. Shipilov (Biography
S.A. Shipilov

Dr. Sergei A. Shipilov of ORNL is one of the U.S. Department of Energy’s leading materials scientists in the field of corrosion. He has a Ph.D. from the Institute of Physical Chemistry of the USSR Academy of Sciences, and has been involved in research on SCC, corrosion fatigue and hydrogen embrittlement for more than 30 years. He was editor of the two-volume “Environment-Induced Cracking of Materials” (Elsevier, 2007) and “Minimizing Infrastructure Corrosion” (NACE, 2009). He is the recipient of the 2015 NACE R.A. Brannon Award, the 2011 ASM G. MacDonald Young Award, and the 2007 Morris Cohen Award of the Canadian Institute of Mining, Metallurgy and Petroleum (CIM). He is a Fellow of ASM International, CIM, and NACE International.

)

Corrosion Science and Technology Group
Tennessee
USA

M. Stack
University of Strathclyde
Glasgow
UK

S. Umoren (Biography
S. Umoren

Dr. Umoren is presently a Research Scientist/Associate Professor at the Center of Research Excellence in Corrosion, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia. He obtained a PhD in Polymer Science from the Federal University of Technology Owerri, Nigeria. He was a Postdoctoral Research Fellow at the State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China. He has authored/co-authored over 120 papers in refereed journals. He is a member of Editorial Board of ten international journals and has been a reviewer to over 80 international reputable journals.

)

King Fahd University of Petroleum and Minerals
Dhahran
Saudi Arabia

B. Wang (Biography
B. Wang

Bin Wang is a Principal Investigator of National Energy Novel Materials Center and China academy of engineering physics (CAEP). He obtained his Ph.D degree from Fudan University in 2009, and then he worked as a postdoc fellow at LBNL, USA. In 2013, he went back to China and worked at Institute of Chemical Materials, CAEP as a staff scientist. He was selected as Expert Fellow of China Energy Society, the National 1000 plan youth talent. He also received the Membership Award of American Chemical Society, as well as excellent contribution honor in 17th IUPAC NMS. He has published more than 60 professional papers; including 5 ESI highly cited papers and several cover/back cover papers.

)

China Academy of Engineering Physics
Shuangliu
China

Z.D. Wei
Chongqing University
Chongqing, Beijing
China

S. Zein El Abedin
Clausthal University of Technology
Clausthal-Zellerfeld
Germany

F. Zheng (Biography
F. Zheng

Trained as metallurgist in Central South Institute of Mining & Metallurgy (1979-1983), worked for steel industry for many years prior to go abroad to Sheffield (Davy Mckee Sheffield and University of Sheffield), UK (1992-1994) and moved to USA joining Pacific Northwest National Laboratory (1994-2000) while attending Washington State University (1994-1996, earned Master in MSE) and University of Washington (1996-2000, earned PhD in MSE) for higher education. Later worked as CTO or VP for two start-up companies (2000-2002) and took post-doc position in Lawrence Berkeley National Laboratory (2002-2003). Returned to China in 2003 as professor of MSE in Central South University.

)

Central South University
Changsha
China


Advertisement

Related Journals




Related eBooks



Webmaster Contact: info@benthamscience.org Copyright © 2017 Bentham Science